Compare commits
| Author | SHA1 | Date | |
|---|---|---|---|
 7iwind
|
ccde2f73e9 | ||
|
7iwind
|
3b44bd97f7 | ||
|
7iwind
|
c5fea61784 | ||
|
7iwind
|
07c4aa316a | ||
|
7iwind
|
5d1ef621db | ||
|
7iwind
|
8fe1b36cdc | ||
|
7iwind
|
b717c5f163 | ||
|
7iwind
|
5ddc63abdf | ||
|
7iwind
|
4e61ef5655 | ||
|
7iwind
|
361158c343 | ||
|
7iwind
|
5fd55496bf | ||
|
7iwind
|
f0d0c4fb1e | ||
|
7iwind
|
26862bf05f | ||
|
7iwind
|
b90c98d3ad | ||
|
7iwind
|
04770e5df2 | ||
|
7iwind
|
5a92e2ccfa | ||
|
7iwind
|
b98236466c | ||
|
7iwind
|
badb4ebf61 | ||
|
7iwind
|
5aba22d8e9 | ||
|
7iwind
|
052df2fc21 | ||
|
7iwind
|
8c670003b8 | ||
|
7iwind
|
dee130197c | ||
|
7iwind
|
d0500151ab | ||
|
7iwind
|
9258ced2d0 | ||
|
7iwind
|
7ba20659b2 | ||
|
7iwind
|
b3578b0b53 | ||
|
7iwind
|
6144b93e10 | ||
|
7iwind
|
e8ee92110b |
@@ -0,0 +1,34 @@
|
||||
name: CI
|
||||
on:
|
||||
push:
|
||||
branches: [main, develop]
|
||||
pull_request:
|
||||
branches: [main]
|
||||
|
||||
jobs:
|
||||
host:
|
||||
runs-on: ubuntu-builder
|
||||
steps:
|
||||
- uses: actions/checkout@v4
|
||||
|
||||
- name: Host build + tests
|
||||
run: |
|
||||
cmake -S . -B build-host \
|
||||
-DBUILD_TESTING=ON -DBUILD_EXAMPLES=ON
|
||||
cmake --build build-host
|
||||
ctest --test-dir build-host --output-on-failure
|
||||
|
||||
cortex-m:
|
||||
runs-on: ubuntu-builder
|
||||
steps:
|
||||
- uses: actions/checkout@v4
|
||||
|
||||
- name: Install ARM GCC
|
||||
run: |
|
||||
sudo apt-get update
|
||||
sudo apt-get install -y gcc-arm-none-eabi
|
||||
|
||||
- name: Cortex-M compile matrix (DR_COMPILE_CHECK)
|
||||
run: |
|
||||
cmake -S . -B build-matrix -DDR_COMPILE_CHECK=ON
|
||||
cmake --build build-matrix --parallel $(nproc)
|
||||
@@ -11,16 +11,62 @@ jobs:
|
||||
with:
|
||||
fetch-depth: 0
|
||||
|
||||
- name: Verify merge commit
|
||||
# ── 自动标签：从合并进来的 PR body 提取 v*.*.* ──
|
||||
- name: Auto-tag from merged PR
|
||||
id: autotag
|
||||
run: |
|
||||
PARENTS=$(git log --format="%P" -1 | wc -w)
|
||||
[ "$PARENTS" -ge 2 ] || exit 78
|
||||
# 已有标签 → 跳过
|
||||
EXISTING=$(git tag --points-at HEAD | grep '^v' | head -n1)
|
||||
if [ -n "$EXISTING" ]; then
|
||||
echo "Tag $EXISTING already exists"
|
||||
echo "tag=$EXISTING" >> "$GITHUB_OUTPUT"
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# 非 merge commit → 跳过
|
||||
PARENTS=$(git log --format="%P" -1 | wc -w)
|
||||
if [ "$PARENTS" -lt 2 ]; then
|
||||
echo "Not a merge commit, skip auto-tag"
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# 从 merge commit message 提取 PR 号
|
||||
COMMIT_MSG=$(git log --format="%B" -1)
|
||||
PR_NUM=$(echo "$COMMIT_MSG" | grep -oP '#\K\d+' | head -1) || true
|
||||
if [ -z "$PR_NUM" ]; then
|
||||
echo "No PR number found in merge message"
|
||||
exit 0
|
||||
fi
|
||||
echo "Merge commit for PR #$PR_NUM"
|
||||
|
||||
# 通过 Gitea API 获取 PR body，提取版本号
|
||||
API="${{ gitea.server_url }}/api/v1/repos/${{ gitea.repository }}/pulls/${PR_NUM}"
|
||||
TOKEN="${{ gitea.token }}"
|
||||
PR_BODY=$(curl -s -H "Authorization: token ${TOKEN}" "${API}" | \
|
||||
python3 -c "import sys,json,re;pr=json.load(sys.stdin);body=pr.get('body','') or '';m=re.search(r'v\d+\.\d+\.\d+',body);print(m.group() if m else '')")
|
||||
|
||||
if [ -z "$PR_BODY" ]; then
|
||||
echo "No version pattern v*.*.* found in PR body"
|
||||
exit 0
|
||||
fi
|
||||
|
||||
VERSION="$PR_BODY"
|
||||
echo "Found version: $VERSION"
|
||||
|
||||
# 创建本地标签（不推送远端）
|
||||
# Gitea Create Release API 会自动在远端创建标签
|
||||
git config user.email "ci@datarouter"
|
||||
git config user.name "DataRouter CI"
|
||||
git tag -a "$VERSION" -m "Release $VERSION" 2>/dev/null || true
|
||||
echo "Created local tag: $VERSION"
|
||||
echo "tag=$VERSION" >> "$GITHUB_OUTPUT"
|
||||
|
||||
# ── 读取标签（已有标签 / auto-tag 创建的标签）──
|
||||
- name: Read tag from HEAD
|
||||
id: tag
|
||||
run: |
|
||||
TAG=$(git tag --points-at HEAD | grep '^v' | head -n1)
|
||||
[ -n "$TAG" ] || exit 78
|
||||
[ -n "$TAG" ] || { echo "No version tag on HEAD"; exit 78; }
|
||||
echo "tag=$TAG" >> "$GITHUB_OUTPUT"
|
||||
|
||||
- name: Install cross-compilers
|
||||
@@ -39,7 +85,7 @@ jobs:
|
||||
"linux-arm64|OFF|-DCMAKE_TOOLCHAIN_FILE=cmake/toolchain-linux-arm64.cmake" \
|
||||
"linux-armhf|OFF|-DCMAKE_TOOLCHAIN_FILE=cmake/toolchain-linux-armhf.cmake" \
|
||||
"windows-amd64|OFF|-DCMAKE_TOOLCHAIN_FILE=cmake/toolchain-windows-amd64.cmake -DBUILD_EXAMPLES=OFF" \
|
||||
"baremetal-arm32|OFF|-DCMAKE_TOOLCHAIN_FILE=cmake/toolchain-baremetal-arm32.cmake -DBUILD_EXAMPLES=OFF -DBUILD_SHARED=OFF"
|
||||
"baremetal-arm32|OFF|-DCMAKE_TOOLCHAIN_FILE=cmake/toolchain-baremetal-arm32.cmake -DBUILD_EXAMPLES=OFF"
|
||||
do
|
||||
IFS='|' read -r name testing extra <<< "$entry"
|
||||
echo ">>> Building $name"
|
||||
@@ -51,6 +97,27 @@ jobs:
|
||||
cmake --install "build-$name" --prefix "dist/$pkg"
|
||||
done
|
||||
|
||||
- name: Cortex-M build & package
|
||||
run: |
|
||||
for name in cm3 cm4-soft cm4-hard cm7-soft cm7-hard; do
|
||||
case $name in
|
||||
cm3) flags="-mcpu=cortex-m3 -mthumb -mfloat-abi=soft" ;;
|
||||
cm4-soft) flags="-mcpu=cortex-m4 -mthumb -mfloat-abi=soft" ;;
|
||||
cm4-hard) flags="-mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard" ;;
|
||||
cm7-soft) flags="-mcpu=cortex-m7 -mthumb -mfloat-abi=soft" ;;
|
||||
cm7-hard) flags="-mcpu=cortex-m7 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard" ;;
|
||||
esac
|
||||
echo ">>> Building $name"
|
||||
cmake -S . -B "build-$name" \
|
||||
-DBUILD_TESTING=OFF -DBUILD_EXAMPLES=OFF \
|
||||
-DCMAKE_C_COMPILER=arm-none-eabi-gcc \
|
||||
-DCMAKE_TRY_COMPILE_TARGET_TYPE=STATIC_LIBRARY \
|
||||
-DCMAKE_C_FLAGS="$flags"
|
||||
cmake --build "build-$name"
|
||||
cmake --install "build-$name" --prefix "dist/datarouter-$name"
|
||||
done
|
||||
echo "--- Cortex-M package build: all variants passed ---"
|
||||
|
||||
- name: Create release & upload assets
|
||||
run: |
|
||||
TAG="${{ steps.tag.outputs.tag }}"
|
||||
|
||||
Generated
+247
@@ -1,6 +1,253 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<project version="4">
|
||||
<component name="BackendCodeEditorSettings">
|
||||
<option name="/Default/CodeInspection/GeneratedCode/GeneratedCodeRegions/=Component_0020Designer_0020generated_0020code/@EntryIndexedValue" value="Component Designer generated code" type="string" />
|
||||
<option name="/Default/CodeInspection/GeneratedCode/GeneratedCodeRegions/=Designer_0020generated_0020code/@EntryIndexedValue" value="Designer generated code" type="string" />
|
||||
<option name="/Default/CodeInspection/GeneratedCode/GeneratedCodeRegions/=Web_0020Form_0020Designer_0020generated_0020code/@EntryIndexedValue" value="Web Form Designer generated code" type="string" />
|
||||
<option name="/Default/CodeInspection/GeneratedCode/GeneratedCodeRegions/=Windows_0020Form_0020Designer_0020generated_0020code/@EntryIndexedValue" value="Windows Form Designer generated code" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CDeclarationWithImplicitIntType/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CommentTypo/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=ConstevalIfIsAlwaysConstant/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppAbstractClassWithoutSpecifier/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppAbstractFinalClass/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppAbstractVirtualFunctionCallInCtor/@EntryIndexedValue" value="ERROR" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppAccessSpecifierWithNoDeclarations/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppAwaiterTypeIsNotClass/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBooleanIncrementExpression/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBoostFormatBadCode/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBoostFormatLegacyCode/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBoostFormatMixedArgs/@EntryIndexedValue" value="ERROR" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBoostFormatTooFewArgs/@EntryIndexedValue" value="ERROR" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBoostFormatTooManyArgs/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppCStyleCast/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppCVQualifierCanNotBeAppliedToReference/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppClassCanBeFinal/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppClassIsIncomplete/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppClassNeedsConstructorBecauseOfUninitializedMember/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppClassNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppCompileTimeConstantCanBeReplacedWithBooleanConstant/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppConceptNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppConditionalExpressionCanBeSimplified/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppConstParameterInDeclaration/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppConstValueFunctionReturnType/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppCoroutineCallResolveError/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAArrayIndexOutOfBounds/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAConstantConditions/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAConstantFunctionResult/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAConstantParameter/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFADeletedPointer/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAEndlessLoop/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAInfiniteRecursion/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAInvalidatedMemory/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFALocalValueEscapesFunction/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFALocalValueEscapesScope/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFALoopConditionNotUpdated/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAMemoryLeak/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFANotInitializedField/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFANullDereference/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFATimeOver/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAUnreachableCode/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAUnreachableFunctionCall/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAUnreadVariable/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAUnusedValue/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclarationHidesLocal/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclarationHidesUncapturedLocal/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclarationSpecifierWithoutDeclarators/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclaratorDisambiguatedAsFunction/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclaratorNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclaratorUsedBeforeInitialization/@EntryIndexedValue" value="ERROR" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDefaultCaseNotHandledInSwitchStatement/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDefaultInitializationWithNoUserConstructor/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDefaultIsUsedAsIdentifier/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDefaultedSpecialMemberFunctionIsImplicitlyDeleted/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDefinitionsOrder/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeletingVoidPointer/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDependentTemplateWithoutTemplateKeyword/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDependentTypeWithoutTypenameKeyword/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeprecatedEntity/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeprecatedOverridenMethod/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeprecatedRegisterStorageClassSpecifier/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDereferenceOperatorLimitExceeded/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDiscardedPostfixOperatorResult/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDoxygenSyntaxError/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDoxygenUndocumentedParameter/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDoxygenUnresolvedReference/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEmptyDeclaration/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceCVQualifiersOrder/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceCVQualifiersPlacement/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceDoStatementBraces/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceForStatementBraces/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceFunctionDeclarationStyle/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceIfStatementBraces/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceNestedNamespacesStyle/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceOverridingDestructorStyle/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceOverridingFunctionStyle/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceTypeAliasCodeStyle/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceWhileStatementBraces/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEntityAssignedButNoRead/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEntityUsedOnlyInUnevaluatedContext/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnumeratorNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEqualOperandsInBinaryExpression/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEvaluationFailure/@EntryIndexedValue" value="ERROR" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppExplicitSpecializationInNonNamespaceScope/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppExpressionWithoutSideEffects/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFinalFunctionInFinalClass/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFinalNonOverridingVirtualFunction/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppForLoopCanBeReplacedWithWhile/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppForwardEnumDeclarationWithoutUnderlyingType/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFunctionDoesntReturnValue/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFunctionIsNotImplemented/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFunctionResultShouldBeUsed/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFunctionalStyleCast/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppHeaderHasBeenAlreadyIncluded/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppHiddenFunction/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppHidingFunction/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppIdenticalOperandsInBinaryExpression/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppIfCanBeReplacedByConstexprIf/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppImplicitDefaultConstructorNotAvailable/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppIncompatiblePointerConversion/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppIncompleteSwitchStatement/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppInconsistentNaming/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppIntegralToPointerConversion/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppInvalidLineContinuation/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppJoinDeclarationAndAssignment/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppLambdaCaptureNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppLocalVariableMayBeConst/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppLocalVariableMightNotBeInitialized/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppLocalVariableWithNonTrivialDtorIsNeverUsed/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppLongFloat/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMemberFunctionMayBeConst/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMemberFunctionMayBeStatic/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMemberInitializersOrder/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMismatchedClassTags/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMissingIncludeGuard/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMissingKeywordThrow/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppModulePartitionWithSeveralPartitionUnits/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtAddressOfClassRValue/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtBindingRValueToLvalueReference/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtCopyElisionInCopyInitDeclarator/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtDoubleUserConversionInCopyInit/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtNotInitializedStaticConstLocalVar/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtReinterpretCastFromNullptr/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMultiCharacterLiteral/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMultiCharacterWideLiteral/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMustBePublicVirtualToImplementInterface/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMutableSpecifierOnReferenceMember/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNoDiscardExpression/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNodiscardFunctionWithoutReturnValue/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNonExceptionSafeResourceAcquisition/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNonExplicitConversionOperator/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNonExplicitConvertingConstructor/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNonInlineFunctionDefinitionInHeaderFile/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNonInlineVariableDefinitionInHeaderFile/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNotAllPathsReturnValue/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppObjectMemberMightNotBeInitialized/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppOutParameterMustBeWritten/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppParameterMayBeConst/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppParameterMayBeConstPtrOrRef/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppParameterNamesMismatch/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppParameterNeverUsed/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPassValueParameterByConstReference/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPointerConversionDropsQualifiers/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPointerToIntegralConversion/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPolymorphicClassWithNonVirtualPublicDestructor/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPossiblyErroneousEmptyStatements/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPossiblyUninitializedMember/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPossiblyUnintendedObjectSlicing/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrecompiledHeaderIsNotIncluded/@EntryIndexedValue" value="ERROR" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrecompiledHeaderNotFound/@EntryIndexedValue" value="ERROR" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrintfBadFormat/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrintfExtraArg/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrintfMissedArg/@EntryIndexedValue" value="ERROR" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrintfRiskyFormat/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrivateSpecialMemberFunctionIsNotImplemented/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRangeBasedForIncompatibleReference/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedefinitionOfDefaultArgumentInOverrideFunction/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantAccessSpecifier/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantBaseClassAccessSpecifier/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantBaseClassInitializer/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantBooleanExpressionArgument/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantCastExpression/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantComplexityInComparison/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantConditionalExpression/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantConstSpecifier/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantControlFlowJump/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantDereferencingAndTakingAddress/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantElaboratedTypeSpecifier/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantElseKeyword/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantElseKeywordInsideCompoundStatement/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantEmptyDeclaration/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantEmptyStatement/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantExportKeyword/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantFwdClassOrEnumSpecifier/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantInlineSpecifier/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantLambdaParameterList/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantMemberInitializer/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantNamespaceDefinition/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantParentheses/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantQualifier/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantQualifierADL/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantStaticSpecifierOnMemberAllocationFunction/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantStaticSpecifierOnThreadLocalLocalVariable/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantTemplateArguments/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantTemplateKeyword/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantTypenameKeyword/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantVoidArgumentList/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantZeroInitializerInAggregateInitialization/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppReinterpretCastFromVoidPtr/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRemoveRedundantBraces/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppReplaceMemsetWithZeroInitialization/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppReplaceTieWithStructuredBinding/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppReturnNoValueInNonVoidFunction/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppSmartPointerVsMakeFunction/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppSomeObjectMembersMightNotBeInitialized/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppSpecialFunctionWithoutNoexceptSpecification/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppStaticAssertFailure/@EntryIndexedValue" value="ERROR" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppStaticDataMemberInUnnamedStruct/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppStaticSpecifierOnAnonymousNamespaceMember/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppStringLiteralToCharPointerConversion/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTabsAreDisallowed/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTemplateArgumentsCanBeDeduced/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTemplateParameterNeverUsed/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTemplateParameterShadowing/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppThrowExpressionCanBeReplacedWithRethrow/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTooWideScope/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTooWideScopeInitStatement/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTypeAliasNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUninitializedDependentBaseClass/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUninitializedNonStaticDataMember/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnionMemberOfReferenceType/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnmatchedPragmaEndRegionDirective/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnmatchedPragmaRegionDirective/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnnamedNamespaceInHeaderFile/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnnecessaryWhitespace/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnsignedZeroComparison/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnusedIncludeDirective/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseAlgorithmWithCount/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseAssociativeContains/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseAuto/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseAutoForNumeric/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseElementsView/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseEraseAlgorithm/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseFamiliarTemplateSyntaxForGenericLambdas/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseRangeAlgorithm/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseStdSize/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseStructuredBinding/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseTypeTraitAlias/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUserDefinedLiteralSuffixDoesNotStartWithUnderscore/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUsingResultOfAssignmentAsCondition/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppVariableCanBeMadeConstexpr/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppVirtualFunctionCallInsideCtor/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppVirtualFunctionInFinalClass/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppVolatileParameterInDeclaration/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppWarningDirective/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppWrongIncludesOrder/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppWrongSlashesInIncludeDirective/@EntryIndexedValue" value="HINT" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppZeroConstantCanBeReplacedWithNullptr/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppZeroValuedExpressionUsedAsNullPointer/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=IdentifierTypo/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=IfStdIsConstantEvaluatedCanBeReplaced/@EntryIndexedValue" value="SUGGESTION" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=StdIsConstantEvaluatedWillAlwaysEvaluateToConstant/@EntryIndexedValue" value="WARNING" type="string" />
|
||||
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=StringLiteralTypo/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
|
||||
</component>
|
||||
</project>
|
||||
@@ -0,0 +1,62 @@
|
||||
# Changelog
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### ⚠ Breaking Changes
|
||||
|
||||
- **API 前缀重命名**：所有 `datarouter_*` / `DATAROUTER_*` 改为 `dr_*` / `DR_*`
|
||||
- `datarouter_init()` → `dr_init()`
|
||||
- `datarouter_port_create()` → `dr_port_create()`
|
||||
- `datarouter_send_<id>()` → `dr_send_<id>()`
|
||||
- `datarouter_on_recv_<id>()` → `dr_on_recv_<id>()`
|
||||
- `DATAROUTER_SEND_sensor` → `DR_SEND_sensor`
|
||||
- `datarouter_port_t` → `dr_port_t`
|
||||
- 配置宏 `DATAROUTER_SEND(...)` / `DATAROUTER_RECV(...)` → `DR_SEND(...)` / `DR_RECV(...)`
|
||||
- **发送函数不再接收 port_id**：`dr_send_<id>(data, len)` 自动广播到所有 send_type 匹配的端口
|
||||
- **端口移除 `recv_type`**：端口只保留 `send_type` + handler 列表，接收侧由用户自行调用 `dr_on_recv_<id>()`
|
||||
|
||||
### 🚀 新功能
|
||||
|
||||
- **自动广播路由**：调用 `dr_send_<id>(data, len)` 时遍历所有端口，自动匹配 `send_type`，逐一调用 handler
|
||||
- **外部配置覆盖**：`datarouter.h` 通过 `__has_include(<datarouter_config.h>)` 优先加载用户配置，找不到时回退到库默认配置
|
||||
- **配置模板**：新增 `datarouter_config_template.h` 供用户快速自定义
|
||||
- **CMake Presets**：新增 `CMakePresets.json`，覆盖 7 种构建配置
|
||||
- **Cortex-M 编译矩阵**：`DR_COMPILE_CHECK=ON` 自动检测 `arm-none-eabi-gcc`，验证 CM3 / CM4(soft/hard) / CM7(soft/hard-sp/hard-dp) 6 个变体的编译兼容性
|
||||
- **嵌入式源文件直用模式**：`DR_SOURCE_ONLY=ON` 只暴露源码路径，用户将 `datarouter.c` 加入自身 target 以继承全部编译标志，消除 VFP/Thumb ABI 不匹配
|
||||
- **Gitea CI 工作流**：新增 `.gitea/workflows/ci.yml`，PR/推送时执行 host 测试 + Cortex-M 编译矩阵
|
||||
- **Release 工作流更新**：`.gitea/workflows/release.yml` 新增 Cortex-M compile matrix 步骤
|
||||
|
||||
### ✨ 增强
|
||||
|
||||
- 支持一个端口注册多个 handler（默认上限 4），发送时逐一调用
|
||||
- 运行时通过 `dr_port_remove_handler()` / `dr_port_clear_handlers()` 动态改变路由
|
||||
- 发送能力和接收能力分开声明，按需组合
|
||||
|
||||
### 📚 文档
|
||||
|
||||
- 新增 `DESIGN.md`（含 8 幅 PlantUML 架构图）
|
||||
- 新增 `TEST_CASES.md`（22 个测试用例文档）
|
||||
- 新增 `CHANGELOG.md`
|
||||
- `README.md` 全面更新，覆盖嵌入式构建、Preset 用法、API 参考
|
||||
- 所有源文件添加中文 Doxygen 注释
|
||||
|
||||
### 🧪 测试
|
||||
|
||||
- 22 个单元测试，覆盖端口管理、send_type/handler 设置、自动广播路由、类型过滤、移除/删除后路由、接收回调、能力元数据
|
||||
|
||||
### 🐛 修复
|
||||
|
||||
- 修复 ARM 交叉编译时 VFP 参数不匹配问题（通过 `DR_SOURCE_ONLY` 模式）
|
||||
- 修复 `#undef` 宏名称残留旧前缀
|
||||
|
||||
---
|
||||
|
||||
## [1.0.0] - 2024-01-01
|
||||
|
||||
### 🚀 新功能
|
||||
|
||||
- 初始版本发布
|
||||
- X-macro 代码生成：编译期声明通道，自动生成枚举、发送函数、回调声明
|
||||
- 动态端口管理：创建、删除、运行时切换能力
|
||||
- 弱符号回调默认实现
|
||||
- Gitea Release 工作流：自动化构建 linux-amd64 / linux-arm64 / linux-armhf / windows-amd64 / baremetal-arm32
|
||||
+89
-50
@@ -1,33 +1,71 @@
|
||||
cmake_minimum_required(VERSION 3.10)
|
||||
project(DataRouter C)
|
||||
project(DataRouter VERSION 1.1.0 LANGUAGES C)
|
||||
|
||||
set(CMAKE_C_STANDARD 11)
|
||||
|
||||
# ======== 静态库 ========
|
||||
# ── 选项 ──────────────────────────────────────────────────────
|
||||
|
||||
option(DR_SOURCE_ONLY "Provide source/include vars instead of building lib" OFF)
|
||||
option(DR_COMPILE_CHECK "Build compile-compatibility tests for each Cortex-M variant" OFF)
|
||||
|
||||
# 源码路径变量：嵌入式项目直接 target_sources() 使用
|
||||
set(DR_SOURCES ${CMAKE_CURRENT_SOURCE_DIR}/datarouter.c CACHE INTERNAL "")
|
||||
set(DR_INCLUDES ${CMAKE_CURRENT_SOURCE_DIR} CACHE INTERNAL "")
|
||||
|
||||
# ── 编译兼容性矩阵 (仅在 host 编译器和 ARM GCC 均可用时生效) ──
|
||||
|
||||
if(DR_COMPILE_CHECK)
|
||||
find_program(ARM_GCC arm-none-eabi-gcc)
|
||||
if(ARM_GCC)
|
||||
message(STATUS "ARM GCC found: ${ARM_GCC}")
|
||||
set(VARIANTS cm3 cm4-soft cm4-hard cm7-soft cm7-hard)
|
||||
set(FLAG_LIST
|
||||
"-mcpu=cortex-m3 -mthumb -mfloat-abi=soft"
|
||||
"-mcpu=cortex-m4 -mthumb -mfloat-abi=soft"
|
||||
"-mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard"
|
||||
"-mcpu=cortex-m7 -mthumb -mfloat-abi=soft"
|
||||
"-mcpu=cortex-m7 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard"
|
||||
)
|
||||
list(LENGTH VARIANTS VN)
|
||||
math(EXPR VN "${VN} - 1")
|
||||
foreach(I RANGE ${VN})
|
||||
list(GET VARIANTS ${I} V)
|
||||
list(GET FLAG_LIST ${I} F)
|
||||
set(TGT "check_${V}")
|
||||
add_custom_target(${TGT}
|
||||
COMMAND ${ARM_GCC} ${F}
|
||||
-c ${CMAKE_CURRENT_SOURCE_DIR}/datarouter.c
|
||||
-I${CMAKE_CURRENT_SOURCE_DIR}
|
||||
-o ${CMAKE_CURRENT_BINARY_DIR}/${TGT}.o
|
||||
COMMENT "Compile check: ${V} (${F})"
|
||||
)
|
||||
message(STATUS " compile check: ${V} (make ${TGT})")
|
||||
endforeach()
|
||||
else()
|
||||
message(WARNING "arm-none-eabi-gcc not found; skipping ARM compile checks")
|
||||
endif()
|
||||
return()
|
||||
endif()
|
||||
|
||||
# ── 源码直用模式（嵌入式项目） ──────────────────────────────
|
||||
|
||||
if(DR_SOURCE_ONLY)
|
||||
return()
|
||||
endif()
|
||||
|
||||
# ── 常规库构建 ────────────────────────────────────────────────
|
||||
|
||||
add_library(DataRouter STATIC datarouter.c)
|
||||
target_include_directories(DataRouter PUBLIC
|
||||
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>
|
||||
$<INSTALL_INTERFACE:include>
|
||||
$<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>
|
||||
)
|
||||
|
||||
# ======== 共享库（可选，通过 BUILD_SHARED 控制） ========
|
||||
option(BUILD_SHARED "Build shared library" ON)
|
||||
if(BUILD_SHARED)
|
||||
add_library(DataRouter_shared SHARED datarouter.c)
|
||||
target_include_directories(DataRouter_shared PUBLIC
|
||||
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>
|
||||
$<INSTALL_INTERFACE:include>
|
||||
)
|
||||
set_target_properties(DataRouter_shared PROPERTIES OUTPUT_NAME DataRouter)
|
||||
endif()
|
||||
|
||||
# ======== 示例程序 ========
|
||||
if(BUILD_EXAMPLES OR NOT DEFINED BUILD_EXAMPLES)
|
||||
add_executable(example example.c)
|
||||
target_link_libraries(example DataRouter)
|
||||
endif()
|
||||
|
||||
# ======== 测试 ========
|
||||
if(BUILD_TESTING OR NOT DEFINED BUILD_TESTING)
|
||||
enable_testing()
|
||||
add_executable(test_datarouter tests/test_datarouter.c)
|
||||
@@ -35,49 +73,50 @@ if(BUILD_TESTING OR NOT DEFINED BUILD_TESTING)
|
||||
add_test(NAME datarouter COMMAND test_datarouter)
|
||||
endif()
|
||||
|
||||
# ======== 安装规则 ========
|
||||
# ── 安装规则（用于打包发布） ─────────────────────────────
|
||||
|
||||
include(GNUInstallDirs)
|
||||
include(CMakePackageConfigHelpers)
|
||||
|
||||
set(DataRouter_INSTALL_CMAKEDIR "${CMAKE_INSTALL_LIBDIR}/cmake/DataRouter")
|
||||
|
||||
# 静态库 → lib/
|
||||
install(TARGETS DataRouter
|
||||
EXPORT DataRouterTargets
|
||||
ARCHIVE DESTINATION lib
|
||||
ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}
|
||||
)
|
||||
|
||||
# 共享库 → lib/（可选）
|
||||
if(TARGET DataRouter_shared)
|
||||
install(TARGETS DataRouter_shared
|
||||
EXPORT DataRouterTargets
|
||||
ARCHIVE DESTINATION lib # .lib (Windows import lib)
|
||||
LIBRARY DESTINATION lib # .so
|
||||
RUNTIME DESTINATION lib # .dll
|
||||
)
|
||||
endif()
|
||||
install(FILES
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/datarouter.h
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/datarouter_config.h
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/datarouter_config_template.h
|
||||
DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}
|
||||
)
|
||||
|
||||
# 示例 → bin/
|
||||
if(TARGET example)
|
||||
install(TARGETS example RUNTIME DESTINATION bin)
|
||||
endif()
|
||||
# ── CMake 包配置文件（find_package(DataRouter) 用） ────
|
||||
|
||||
# 头文件 → include/
|
||||
install(FILES datarouter.h DESTINATION include)
|
||||
set(PACKAGE_INCLUDE_INSTALL_DIR ${CMAKE_INSTALL_INCLUDEDIR})
|
||||
set(PACKAGE_LIB_INSTALL_DIR ${CMAKE_INSTALL_LIBDIR})
|
||||
|
||||
# 文档 → share/
|
||||
install(FILES datarouter_config_template.h LICENSE DESTINATION share)
|
||||
if(EXISTS ${CMAKE_SOURCE_DIR}/README.md)
|
||||
install(FILES README.md DESTINATION share)
|
||||
endif()
|
||||
|
||||
# CMake 包配置文件 → cmake/
|
||||
set(INCLUDE_INSTALL_DIR include)
|
||||
set(LIB_INSTALL_DIR lib)
|
||||
|
||||
include(CMakePackageConfigHelpers)
|
||||
configure_package_config_file(
|
||||
cmake/DataRouterConfig.cmake.in
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/cmake/DataRouterConfig.cmake.in
|
||||
${CMAKE_CURRENT_BINARY_DIR}/DataRouterConfig.cmake
|
||||
INSTALL_DESTINATION cmake
|
||||
PATH_VARS INCLUDE_INSTALL_DIR LIB_INSTALL_DIR
|
||||
INSTALL_DESTINATION ${DataRouter_INSTALL_CMAKEDIR}
|
||||
PATH_VARS PACKAGE_INCLUDE_INSTALL_DIR PACKAGE_LIB_INSTALL_DIR
|
||||
)
|
||||
|
||||
install(FILES ${CMAKE_CURRENT_BINARY_DIR}/DataRouterConfig.cmake DESTINATION cmake)
|
||||
install(EXPORT DataRouterTargets FILE DataRouterTargets.cmake DESTINATION cmake)
|
||||
write_basic_package_version_file(
|
||||
${CMAKE_CURRENT_BINARY_DIR}/DataRouterConfigVersion.cmake
|
||||
VERSION ${PROJECT_VERSION}
|
||||
COMPATIBILITY AnyNewerVersion
|
||||
)
|
||||
|
||||
install(EXPORT DataRouterTargets
|
||||
FILE DataRouterTargets.cmake
|
||||
DESTINATION ${DataRouter_INSTALL_CMAKEDIR}
|
||||
)
|
||||
|
||||
install(FILES
|
||||
${CMAKE_CURRENT_BINARY_DIR}/DataRouterConfig.cmake
|
||||
${CMAKE_CURRENT_BINARY_DIR}/DataRouterConfigVersion.cmake
|
||||
DESTINATION ${DataRouter_INSTALL_CMAKEDIR}
|
||||
)
|
||||
|
||||
@@ -0,0 +1,96 @@
|
||||
{
|
||||
"version": 3,
|
||||
"configurePresets": [
|
||||
{
|
||||
"name": "default",
|
||||
"displayName": "Host (native) build",
|
||||
"description": "Build with host compiler for development, testing, and examples",
|
||||
"binaryDir": "${sourceDir}/build/default",
|
||||
"cacheVariables": {
|
||||
"BUILD_TESTING": "ON",
|
||||
"BUILD_EXAMPLES": "ON"
|
||||
}
|
||||
},
|
||||
{
|
||||
"name": "cm3",
|
||||
"displayName": "Cortex-M3 (soft-float)",
|
||||
"description": "ARM Cortex-M3, no FPU, software float ABI. Requires arm-none-eabi-gcc in PATH.",
|
||||
"binaryDir": "${sourceDir}/build/cm3",
|
||||
"cacheVariables": {
|
||||
"CMAKE_C_FLAGS": "-mcpu=cortex-m3 -mthumb -mfloat-abi=soft -Wall -Werror",
|
||||
"DR_SOURCE_ONLY": "ON",
|
||||
"BUILD_TESTING": "OFF",
|
||||
"BUILD_EXAMPLES": "OFF"
|
||||
}
|
||||
},
|
||||
{
|
||||
"name": "cm4-soft",
|
||||
"displayName": "Cortex-M4 (soft-float)",
|
||||
"description": "ARM Cortex-M4, FPU present but soft-float ABI. Requires arm-none-eabi-gcc.",
|
||||
"binaryDir": "${sourceDir}/build/cm4-soft",
|
||||
"cacheVariables": {
|
||||
"CMAKE_C_FLAGS": "-mcpu=cortex-m4 -mthumb -mfloat-abi=soft -Wall -Werror",
|
||||
"DR_SOURCE_ONLY": "ON",
|
||||
"BUILD_TESTING": "OFF",
|
||||
"BUILD_EXAMPLES": "OFF"
|
||||
}
|
||||
},
|
||||
{
|
||||
"name": "cm4-hard",
|
||||
"displayName": "Cortex-M4F (hard-float, FPv4-SP-D16)",
|
||||
"description": "ARM Cortex-M4 with single-precision FPU, hard-float ABI. Requires arm-none-eabi-gcc.",
|
||||
"binaryDir": "${sourceDir}/build/cm4-hard",
|
||||
"cacheVariables": {
|
||||
"CMAKE_C_FLAGS": "-mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -Wall -Werror",
|
||||
"DR_SOURCE_ONLY": "ON",
|
||||
"BUILD_TESTING": "OFF",
|
||||
"BUILD_EXAMPLES": "OFF"
|
||||
}
|
||||
},
|
||||
{
|
||||
"name": "cm7-soft",
|
||||
"displayName": "Cortex-M7 (soft-float)",
|
||||
"description": "ARM Cortex-M7, FPU present but soft-float ABI. Requires arm-none-eabi-gcc.",
|
||||
"binaryDir": "${sourceDir}/build/cm7-soft",
|
||||
"cacheVariables": {
|
||||
"CMAKE_C_FLAGS": "-mcpu=cortex-m7 -mthumb -mfloat-abi=soft -Wall -Werror",
|
||||
"DR_SOURCE_ONLY": "ON",
|
||||
"BUILD_TESTING": "OFF",
|
||||
"BUILD_EXAMPLES": "OFF"
|
||||
}
|
||||
},
|
||||
{
|
||||
"name": "cm7-hard-sp",
|
||||
"displayName": "Cortex-M7F (hard-float, FPv5-SP-D16, single)",
|
||||
"description": "ARM Cortex-M7 with single-precision FPU, hard-float ABI. Requires arm-none-eabi-gcc.",
|
||||
"binaryDir": "${sourceDir}/build/cm7-hard-sp",
|
||||
"cacheVariables": {
|
||||
"CMAKE_C_FLAGS": "-mcpu=cortex-m7 -mthumb -mfpu=fpv5-sp-d16 -mfloat-abi=hard -Wall -Werror",
|
||||
"DR_SOURCE_ONLY": "ON",
|
||||
"BUILD_TESTING": "OFF",
|
||||
"BUILD_EXAMPLES": "OFF"
|
||||
}
|
||||
},
|
||||
{
|
||||
"name": "cm7-hard-dp",
|
||||
"displayName": "Cortex-M7F (hard-float, FPv5-D16, double)",
|
||||
"description": "ARM Cortex-M7 with double-precision FPU, hard-float ABI. Requires arm-none-eabi-gcc.",
|
||||
"binaryDir": "${sourceDir}/build/cm7-hard-dp",
|
||||
"cacheVariables": {
|
||||
"CMAKE_C_FLAGS": "-mcpu=cortex-m7 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard -Wall -Werror",
|
||||
"DR_SOURCE_ONLY": "ON",
|
||||
"BUILD_TESTING": "OFF",
|
||||
"BUILD_EXAMPLES": "OFF"
|
||||
}
|
||||
}
|
||||
],
|
||||
"buildPresets": [
|
||||
{ "name": "default", "configurePreset": "default" },
|
||||
{ "name": "cm3", "configurePreset": "cm3" },
|
||||
{ "name": "cm4-soft", "configurePreset": "cm4-soft" },
|
||||
{ "name": "cm4-hard", "configurePreset": "cm4-hard" },
|
||||
{ "name": "cm7-soft", "configurePreset": "cm7-soft" },
|
||||
{ "name": "cm7-hard-sp", "configurePreset": "cm7-hard-sp" },
|
||||
{ "name": "cm7-hard-dp", "configurePreset": "cm7-hard-dp" }
|
||||
]
|
||||
}
|
||||
@@ -2,37 +2,35 @@
|
||||
|
||||
## 1. 设计目标
|
||||
|
||||
轻量级 C 语言数据路由库。发送与接收能力分开声明，每个端口独立设置发送类型和接收类型，支持多外设一对多广播路由。
|
||||
轻量级 C 语言数据路由库。发送与接收能力分开声明，端口绑定 `send_type` 和外设 handler 列表。调用 `dr_send_<id>(data, len)` 时自动遍历端口表，广播到所有 `send_type` 匹配的端口。
|
||||
|
||||
### 核心设计
|
||||
|
||||
```
|
||||
DATAROUTER_SEND_CAPABILITIES DATAROUTER_RECV_CAPABILITIES
|
||||
DATAROUTER_SEND(sensor, ...) DATAROUTER_RECV(rtcm, ...)
|
||||
DATAROUTER_SEND(status, ...) DATAROUTER_RECV(command, ...)
|
||||
DR_SEND_CAPABILITIES DR_RECV_CAPABILITIES
|
||||
DR_SEND(sensor, ...) DR_RECV(rtcm, ...)
|
||||
DR_SEND(status, ...) DR_RECV(command, ...)
|
||||
│ │
|
||||
▼ ▼
|
||||
send_sensor(port, data) on_recv_rtcm(port, data)
|
||||
send_status(port, data) on_recv_command(port, data)
|
||||
send_sensor(data, len) on_recv_rtcm(port, data, len)
|
||||
│ （用户实现回调）
|
||||
▼
|
||||
端口校验 → for each handler(port, data)
|
||||
遍历端口表 → send_type 匹配？
|
||||
│
|
||||
┌────────┼────────┐
|
||||
▼ ▼ ▼
|
||||
UART TCP CAN
|
||||
▼
|
||||
for each handler(port, data) ─── UART / TCP / CAN
|
||||
```
|
||||
|
||||
**关键区别**：sensor 只声明发送，不生成接收回调；rtcm 只声明接收，不生成发送函数。端口可独立设置 send_type 和 recv_type，互不干扰。
|
||||
**关键**：send 无 port_id 参数，自动路由到所有匹配端口。
|
||||
|
||||
### 设计原则
|
||||
|
||||
| 原则 | 说明 |
|
||||
|------|------|
|
||||
| 收发分离 | 发送能力和接收能力在配置中分开声明，按需组合 |
|
||||
| 编译期确定能力 | 所有能力在 `datarouter_config.h` 中声明，库自动生成代码 |
|
||||
| 收发分离 | 发送/接收能力在配置中分开声明，按需组合 |
|
||||
| 编译期确定能力 | 所有能力在 `dr_config.h` 中声明，库自动生成代码 |
|
||||
| 运行期绑定外设 | 端口创建后，通过 `add_handler` 注册物理外设发送函数 |
|
||||
| 一对多广播 | 一个端口可注册多个 handler，发送时逐一调用 |
|
||||
| 自动广播 | `send_<id>(data, len)` 遍历所有端口，自动匹配 send_type |
|
||||
| 不关心物理外设 | 库不依赖任何外设 API，只调用用户提供的 handler |
|
||||
| 零动态内存 | 纯静态数组，无 malloc/free |
|
||||
|
||||
@@ -47,23 +45,22 @@ DATAROUTER_SEND_CAPABILITIES DATAROUTER_RECV_CAPABILITIES
|
||||
left to right direction
|
||||
|
||||
rectangle "用户代码" as User {
|
||||
component "应用逻辑" as App
|
||||
component "datarouter_config.h\n声明发送+接收能力" as Cfg
|
||||
component "应用逻辑\n调 send_<id>(data, len)" as App
|
||||
component "dr_config.h\n声明能力" as Cfg
|
||||
component "外设 handler\nUART / TCP / CAN" as Handlers
|
||||
component "接收回调\n处理收到的报文" as Callbacks
|
||||
component "接收回调\non_recv_<id>()" as Callbacks
|
||||
}
|
||||
|
||||
database "DataRouter 库" as Lib {
|
||||
component "datarouter.h\n公共 API + X-macro 展开" as Hdr
|
||||
component "datarouter.c\n端口表 + handler 遍历" as Impl
|
||||
component "datarouter.h\n公共 API + X-macro" as Hdr
|
||||
component "datarouter.c\n端口表+遍历路由" as Impl
|
||||
}
|
||||
|
||||
App --> Hdr
|
||||
Cfg --> Hdr
|
||||
Impl --> Cfg
|
||||
Handlers --> Impl : 注册 handler
|
||||
Handlers --> Impl : add_handler
|
||||
Callbacks --> Impl : 实现 on_recv_<id>
|
||||
|
||||
@enduml
|
||||
```
|
||||
|
||||
@@ -71,11 +68,11 @@ Callbacks --> Impl : 实现 on_recv_<id>
|
||||
|
||||
| 文件 | 职责 |
|
||||
|------|------|
|
||||
| `datarouter_config.h` | 分别声明 `SEND_CAPABILITIES` 和 `RECV_CAPABILITIES` |
|
||||
| `datarouter.h` | 公共 API + X-macro 展开（两组枚举 + 声明） |
|
||||
| `datarouter.c` | 端口表 + handler 列表遍历 + 弱符号回调 |
|
||||
| `example.c` | 收发分离示例 |
|
||||
| `tests/test_datarouter.c` | 27 个单元测试 |
|
||||
| `dr_config.h` | 声明 `SEND_CAPABILITIES` 和 `RECV_CAPABILITIES` |
|
||||
| `datarouter.h` | 公共 API + X-macro 展开 |
|
||||
| `datarouter.c` | 端口表 + send 遍历 + 弱符号回调 |
|
||||
| `example.c` | 使用示例 |
|
||||
| `tests/test_datarouter.c` | 22 个单元测试 |
|
||||
|
||||
---
|
||||
|
||||
@@ -84,90 +81,71 @@ Callbacks --> Impl : 实现 on_recv_<id>
|
||||
### 3.1 配置声明
|
||||
|
||||
```c
|
||||
// 发送能力 —— 只生成发送触发函数
|
||||
#define DATAROUTER_SEND_CAPABILITIES \
|
||||
DATAROUTER_SEND(sensor, "Sensor data report") \
|
||||
DATAROUTER_SEND(status, "Device status report")
|
||||
#define DR_SEND_CAPABILITIES \
|
||||
DR_SEND(sensor, "Sensor data report") \
|
||||
DR_SEND(status, "Device status report")
|
||||
|
||||
// 接收能力 —— 只生成接收回调声明
|
||||
#define DATAROUTER_RECV_CAPABILITIES \
|
||||
DATAROUTER_RECV(rtcm, "RTCM correction data") \
|
||||
DATAROUTER_RECV(command, "Remote control command")
|
||||
#define DR_RECV_CAPABILITIES \
|
||||
DR_RECV(rtcm, "RTCM correction data") \
|
||||
DR_RECV(command, "Remote control command")
|
||||
```
|
||||
|
||||
### 3.2 展开产物
|
||||
|
||||
```
|
||||
DATAROUTER_SEND_CAPABILITIES 展开：
|
||||
enum: DATAROUTER_SEND_sensor = 0,
|
||||
DATAROUTER_SEND_status = 1,
|
||||
DATAROUTER_SEND_CAP_COUNT = 2
|
||||
发送函数: int datarouter_send_sensor(port, data, len);
|
||||
int datarouter_send_status(port, data, len);
|
||||
DR_SEND_CAPABILITIES 展开：
|
||||
enum: sensor = 0, status = 1, SEND_CAP_COUNT = 2
|
||||
发送函数: int dr_send_sensor(const void *data, size_t len);
|
||||
int dr_send_status(const void *data, size_t len);
|
||||
元数据: send_names[] = {"sensor", "status"}
|
||||
send_descs[] = {"Sensor data report", "Device status report"}
|
||||
|
||||
DATAROUTER_RECV_CAPABILITIES 展开：
|
||||
enum: DATAROUTER_RECV_rtcm = 0,
|
||||
DATAROUTER_RECV_command = 1,
|
||||
DATAROUTER_RECV_CAP_COUNT = 2
|
||||
接收回调: void datarouter_on_recv_rtcm(port, data, len);
|
||||
void datarouter_on_recv_command(port, data, len);
|
||||
弱符号默认: 每个回调提供空的 weak 实现，用户覆盖
|
||||
DR_RECV_CAPABILITIES 展开：
|
||||
enum: rtcm = 0, command = 1, RECV_CAP_COUNT = 2
|
||||
接收回调: void dr_on_recv_rtcm(uint32_t port, const void*, size_t);
|
||||
void dr_on_recv_command(uint32_t port, const void*, size_t);
|
||||
弱符号默认: 空实现，用户覆盖
|
||||
元数据: recv_names[] = {"rtcm", "command"}
|
||||
recv_descs[] = {"RTCM correction data", "Remote control command"}
|
||||
```
|
||||
|
||||
### 3.3 端口组合示例
|
||||
### 3.3 端口示例
|
||||
|
||||
```
|
||||
端口 A: send_type = sensor, recv_type = -1 → 只发送
|
||||
端口 B: send_type = -1, recv_type = rtcm → 只接收
|
||||
端口 C: send_type = status, recv_type = command → 同时收发
|
||||
端口 D: send_type = -1, recv_type = -1 → 无功能
|
||||
端口 A: send_type = sensor, handlers=[uart_send, tcp_send]
|
||||
端口 B: send_type = sensor, handlers=[can_send]
|
||||
端口 C: send_type = status, handlers=[uart_send]
|
||||
```
|
||||
|
||||
调用 `send_sensor("temp", 4)` → A 和 B 同时触发。
|
||||
|
||||
---
|
||||
|
||||
## 4. X-macro 代码生成
|
||||
|
||||
### 4.1 展开流程
|
||||
|
||||
```plantuml
|
||||
@startuml
|
||||
== datarouter.h：4 次展开 ==
|
||||
== datarouter.h ==
|
||||
|
||||
-> datarouter_config.h: 获得两组宏列表
|
||||
-> dr_config.h: 获得两组宏列表
|
||||
|
||||
datarouter.h -> "第 1 遍":
|
||||
#define DATAROUTER_SEND(id,desc) DATAROUTER_SEND_##id,
|
||||
DATAROUTER_SEND_CAPABILITIES → 发送 enum
|
||||
datarouter.h -> "1": #define DR_SEND(id,desc) DR_SEND_##id,
|
||||
note right: 发送 enum
|
||||
|
||||
datarouter.h -> "第 2 遍":
|
||||
#define DATAROUTER_RECV(id,desc) DATAROUTER_RECV_##id,
|
||||
DATAROUTER_RECV_CAPABILITIES → 接收 enum
|
||||
datarouter.h -> "2": #define DR_RECV(id,desc) DR_RECV_##id,
|
||||
note right: 接收 enum
|
||||
|
||||
datarouter.h -> "第 3 遍":
|
||||
#define DATAROUTER_SEND(id,desc) int datarouter_send_##id(...);
|
||||
DATAROUTER_SEND_CAPABILITIES → 发送函数声明
|
||||
datarouter.h -> "3": #define DR_SEND(id,desc) int send_##id(data, len);
|
||||
note right: 发送函数声明
|
||||
|
||||
datarouter.h -> "第 4 遍":
|
||||
#define DATAROUTER_RECV(id,desc) void datarouter_on_recv_##id(...);
|
||||
DATAROUTER_RECV_CAPABILITIES → 接收回调声明
|
||||
datarouter.h -> "4": #define DR_RECV(id,desc) void on_recv_##id(...);
|
||||
note right: 接收回调声明
|
||||
|
||||
== datarouter.c：4 次展开 ==
|
||||
|
||||
datarouter.c -> "第 5 遍":
|
||||
弱符号回调默认实现（DATAROUTER_RECV 展开）
|
||||
|
||||
datarouter.c -> "第 6 遍":
|
||||
发送函数实现 body（DATAROUTER_SEND 展开）
|
||||
校验 → 遍历 handler 列表
|
||||
|
||||
datarouter.c -> "第 7 ~ 8 遍":
|
||||
send_names[] / send_descs[]
|
||||
recv_names[] / recv_descs[]
|
||||
== datarouter.c ==
|
||||
|
||||
datarouter.c -> "5": 弱符号回调默认实现
|
||||
datarouter.c -> "6": 发送函数实现（遍历端口表）
|
||||
datarouter.c -> "7~8": send_names[] / send_descs[] / recv_names[] / recv_descs[]
|
||||
@enduml
|
||||
```
|
||||
|
||||
@@ -181,33 +159,23 @@ datarouter.c -> "第 7 ~ 8 遍":
|
||||
@startuml
|
||||
skinparam classAttributeIconSize 0
|
||||
|
||||
enum "datarouter_send_cap" as S {
|
||||
SENSOR
|
||||
STATUS
|
||||
SEND_CAP_COUNT
|
||||
}
|
||||
|
||||
enum "datarouter_recv_cap" as R {
|
||||
RTCM
|
||||
COMMAND
|
||||
RECV_CAP_COUNT
|
||||
}
|
||||
enum "dr_send_cap" as S { SENSOR, STATUS, SEND_CAP_COUNT }
|
||||
enum "dr_recv_cap" as R { RTCM, COMMAND, RECV_CAP_COUNT }
|
||||
|
||||
class "port_entry_t" as Entry {
|
||||
- int send_type
|
||||
- int recv_type
|
||||
- datarouter_send_handler_t handlers[]
|
||||
- dr_send_handler_t handlers[]
|
||||
- int count
|
||||
- uint8_t in_use
|
||||
}
|
||||
|
||||
class "datarouter_send_handler_t" as Handler {
|
||||
class "dr_send_handler_t" as Handler {
|
||||
+ void (*)(uint32_t port_id, const void *data, size_t len)
|
||||
}
|
||||
|
||||
class "发送函数" as Send {
|
||||
+ int send_sensor(port, data, len)
|
||||
+ int send_status(port, data, len)
|
||||
+ int send_sensor(data, len)
|
||||
+ int send_status(data, len)
|
||||
}
|
||||
|
||||
class "接收回调" as Recv {
|
||||
@@ -215,10 +183,9 @@ class "接收回调" as Recv {
|
||||
+ void on_recv_command(port, data, len)
|
||||
}
|
||||
|
||||
Entry --> S : send_type ∈ S enum / -1
|
||||
Entry --> R : recv_type ∈ R enum / -1
|
||||
Entry --> Handler : handlers[] 数组
|
||||
Send --> Entry : 校验 send_type + 遍历 handlers
|
||||
Entry --> S : send_type
|
||||
Entry --> Handler : handlers[]
|
||||
Send --> Entry : 遍历端口表 → 匹配 send_type → 遍历 handlers
|
||||
Recv --> Entry : 用户根据业务调对应回调
|
||||
@enduml
|
||||
```
|
||||
@@ -226,13 +193,12 @@ Recv --> Entry : 用户根据业务调对应回调
|
||||
### 5.2 `port_entry_t`
|
||||
|
||||
```c
|
||||
#define DATAROUTER_MAX_HANDLERS_PER_PORT 4 // 每端口最多 4 个外设
|
||||
#define DR_MAX_HANDLERS_PER_PORT 4
|
||||
|
||||
typedef struct {
|
||||
int send_type; // DATAROUTER_SEND_xxx / -1
|
||||
int recv_type; // DATAROUTER_RECV_xxx / -1
|
||||
datarouter_send_handler_t handlers[DATAROUTER_MAX_HANDLERS_PER_PORT];
|
||||
int count; // 当前 handler 数量
|
||||
int send_type;
|
||||
dr_send_handler_t handlers[DR_MAX_HANDLERS_PER_PORT];
|
||||
int count;
|
||||
uint8_t in_use;
|
||||
} port_entry_t;
|
||||
```
|
||||
@@ -240,8 +206,8 @@ typedef struct {
|
||||
### 5.3 端口表
|
||||
|
||||
```c
|
||||
#define DATAROUTER_MAX_PORTS 64
|
||||
static port_entry_t ports[DATAROUTER_MAX_PORTS];
|
||||
#define DR_MAX_PORTS 64
|
||||
static port_entry_t ports[DR_MAX_PORTS];
|
||||
static uint8_t initialized;
|
||||
```
|
||||
|
||||
@@ -252,57 +218,53 @@ static uint8_t initialized;
|
||||
### 6.1 初始化
|
||||
|
||||
```c
|
||||
void datarouter_init(void); // 幂等初始化
|
||||
void datarouter_reset(void); // 重置全部状态
|
||||
void dr_init(void); // 幂等初始化
|
||||
void dr_reset(void); // 重置全部状态
|
||||
```
|
||||
|
||||
### 6.2 端口管理
|
||||
|
||||
```c
|
||||
datarouter_port_t datarouter_port_create(void); // 创建
|
||||
void datarouter_port_delete(datarouter_port_t port); // 删除
|
||||
dr_port_t dr_port_create(void);
|
||||
void dr_port_delete(dr_port_t port);
|
||||
|
||||
void datarouter_port_set_send_type(port, int cap_id); // 设置发送类型
|
||||
int datarouter_port_get_send_type(port); // -1 表示未设置
|
||||
void datarouter_port_set_recv_type(port, int cap_id); // 设置接收类型
|
||||
int datarouter_port_get_recv_type(port); // -1 表示未设置
|
||||
void dr_port_set_send_type(port, int cap_id);
|
||||
int dr_port_get_send_type(port);
|
||||
|
||||
int datarouter_port_add_handler(port, handler); // 注册外设 handler
|
||||
int datarouter_port_remove_handler(port, handler); // 移除
|
||||
void datarouter_port_clear_handlers(port); // 清除全部
|
||||
int datarouter_port_handler_count(port); // 数量
|
||||
int dr_port_add_handler(port, handler);
|
||||
int dr_port_remove_handler(port, handler);
|
||||
void dr_port_clear_handlers(port);
|
||||
int dr_port_handler_count(port);
|
||||
```
|
||||
|
||||
### 6.3 发送触发函数（每个 SEND 能力生成一个）
|
||||
|
||||
```c
|
||||
int datarouter_send_sensor(port, data, len);
|
||||
int datarouter_send_status(port, data, len);
|
||||
int dr_send_sensor(const void *data, size_t len);
|
||||
int dr_send_status(const void *data, size_t len);
|
||||
```
|
||||
|
||||
返回值：0 成功 / -1 未初始化 / -2 端口无效 / -3 send_type 不匹配 / -4 无 handler
|
||||
返回值：0 成功 / -1 未初始化 / -2 无端口匹配该 send_type
|
||||
|
||||
### 6.4 接收回调（每个 RECV 能力生成一个声明）
|
||||
|
||||
```c
|
||||
void datarouter_on_recv_rtcm(uint32_t port_id, const void *data, size_t len);
|
||||
void datarouter_on_recv_command(uint32_t port_id, const void *data, size_t len);
|
||||
void dr_on_recv_rtcm(uint32_t port_id, const void *data, size_t len);
|
||||
void dr_on_recv_command(uint32_t port_id, const void *data, size_t len);
|
||||
```
|
||||
|
||||
库提供弱符号默认空实现，用户定义同名函数覆盖。
|
||||
库提供弱符号默认空实现。
|
||||
|
||||
### 6.5 能力元数据（两组独立）
|
||||
### 6.5 能力元数据
|
||||
|
||||
```c
|
||||
// 发送能力
|
||||
int datarouter_send_cap_count(void);
|
||||
const char *datarouter_send_cap_name(int cap_id);
|
||||
const char *datarouter_send_cap_desc(int cap_id);
|
||||
int dr_send_cap_count(void);
|
||||
const char *dr_send_cap_name(int cap_id);
|
||||
const char *dr_send_cap_desc(int cap_id);
|
||||
|
||||
// 接收能力
|
||||
int datarouter_recv_cap_count(void);
|
||||
const char *datarouter_recv_cap_name(int cap_id);
|
||||
const char *datarouter_recv_cap_desc(int cap_id);
|
||||
int dr_recv_cap_count(void);
|
||||
const char *dr_recv_cap_name(int cap_id);
|
||||
const char *dr_recv_cap_desc(int cap_id);
|
||||
```
|
||||
|
||||
---
|
||||
@@ -314,34 +276,36 @@ const char *datarouter_recv_cap_desc(int cap_id);
|
||||
```plantuml
|
||||
@startuml
|
||||
actor "应用" as App
|
||||
participant "datarouter_send_sensor()" as Send
|
||||
participant "端口表" as Table
|
||||
participant "dr_send_sensor()" as Send
|
||||
participant "端口表 ports[]" as Table
|
||||
participant "handlers[]" as HList
|
||||
participant "外设" as Dev
|
||||
|
||||
App -> Send : send_sensor(port=2, data, len)
|
||||
App -> Send : send_sensor("temp:25.3", 9)
|
||||
|
||||
group 校验
|
||||
group 初始化检查
|
||||
Send -> Send : initialized?
|
||||
alt 否 → return -1
|
||||
end
|
||||
Send -> Table : ports[2].in_use?
|
||||
alt 否 → return -2
|
||||
end
|
||||
Send -> Table : ports[2].send_type == SENSOR?
|
||||
alt 否 → return -3
|
||||
end
|
||||
Send -> Table : ports[2].count > 0?
|
||||
alt 否 → return -4
|
||||
end
|
||||
end
|
||||
|
||||
loop for each handler in ports[2].handlers[]
|
||||
Send -> HList : handlers[i](port, data, len)
|
||||
group 遍历端口表
|
||||
loop for p in 0..MAX_PORTS-1
|
||||
Send -> Table : ports[p].in_use && ports[p].send_type == SENSOR ?
|
||||
alt 匹配
|
||||
loop for h in 0..count-1
|
||||
Send -> HList : handlers[h](p, data, len)
|
||||
HList -> Dev : 实际外设写入
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
Send --> App : return 0
|
||||
alt 至少调了一次 handler
|
||||
Send --> App : return 0
|
||||
else 无匹配端口
|
||||
Send --> App : return -2
|
||||
end
|
||||
@enduml
|
||||
```
|
||||
|
||||
@@ -353,7 +317,7 @@ actor "外设" as Dev
|
||||
participant "用户分发代码" as Dispatch
|
||||
participant "on_recv_rtcm()" as Callback
|
||||
|
||||
Dev -> Dispatch : 收到数据，识别为 rtcm 类型
|
||||
Dev -> Dispatch : 收到数据，识别为 rtcm
|
||||
Dispatch -> Callback : on_recv_rtcm(port_id, data, len)
|
||||
Callback --> Dispatch : void
|
||||
@enduml
|
||||
@@ -364,19 +328,14 @@ Callback --> Dispatch : void
|
||||
```plantuml
|
||||
@startuml
|
||||
state "空闲" as Idle
|
||||
state "已创建\nsend=-1 recv=-1" as Created
|
||||
state "已创建\nsend_type=-1\ncount=0" as Created
|
||||
state "已配置" as Config
|
||||
|
||||
[*] --> Idle : reset / 启动
|
||||
|
||||
Idle --> Created : port_create()
|
||||
|
||||
Created --> Config : set_send_type / set_recv_type / add_handler
|
||||
|
||||
Config --> Config : 独立切换 send_type / recv_type\n增删 handler
|
||||
|
||||
Config --> Created : set_send_type(-1) / set_recv_type(-1)\nclear_handlers
|
||||
|
||||
Created --> Config : set_send_type / add_handler
|
||||
Config --> Config : 切换 send_type\n增删 handler
|
||||
Config --> Created : set_send_type(-1) / clear_handlers
|
||||
Created --> Idle : port_delete()
|
||||
Config --> Idle : port_delete()
|
||||
Idle --> Created : 复用 ID
|
||||
@@ -387,42 +346,38 @@ Idle --> Created : 复用 ID
|
||||
|
||||
## 8. 路由场景
|
||||
|
||||
### 场景 1：传感器只发送（sensor → UART + TCP）
|
||||
### 场景 1：sensor 广播到 UART + TCP + CAN
|
||||
|
||||
```c
|
||||
datarouter_port_t p = datarouter_port_create();
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(p, uart_send);
|
||||
datarouter_port_add_handler(p, tcp_send);
|
||||
dr_port_t p1 = dr_port_create();
|
||||
dr_port_set_send_type(p1, DR_SEND_sensor);
|
||||
dr_port_add_handler(p1, uart_send);
|
||||
dr_port_add_handler(p1, tcp_send);
|
||||
|
||||
datarouter_send_sensor(p, "temp:25.3", 9);
|
||||
// → uart_send(p, "temp:25.3", 9)
|
||||
// → tcp_send(p, "temp:25.3", 9)
|
||||
dr_port_t p2 = dr_port_create();
|
||||
dr_port_set_send_type(p2, DR_SEND_sensor);
|
||||
dr_port_add_handler(p2, can_send);
|
||||
|
||||
dr_send_sensor("temp:25.3", 9);
|
||||
// → uart_send(p1, "temp:25.3", 9)
|
||||
// → tcp_send(p1, "temp:25.3", 9)
|
||||
// → can_send(p2, "temp:25.3", 9)
|
||||
```
|
||||
|
||||
### 场景 2：RTCM 只接收
|
||||
### 场景 2：仅接收
|
||||
|
||||
```c
|
||||
datarouter_port_t p = datarouter_port_create();
|
||||
datarouter_port_set_recv_type(p, DATAROUTER_RECV_rtcm);
|
||||
// 无 send_type，不注册 handler
|
||||
|
||||
// 外设收到数据后由用户调回调：
|
||||
datarouter_on_recv_rtcm(p, data, len);
|
||||
void dr_on_recv_rtcm(uint32_t port_id, const void *data, size_t len) {
|
||||
apply_rtcm_correction(data, len);
|
||||
}
|
||||
// 外设收到后：dr_on_recv_rtcm(port, data, len);
|
||||
```
|
||||
|
||||
### 场景 3：双向端口（status 发送 + command 接收）
|
||||
### 场景 3：运行时移除 handler
|
||||
|
||||
```c
|
||||
datarouter_port_t p = datarouter_port_create();
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_status);
|
||||
datarouter_port_set_recv_type(p, DATAROUTER_RECV_command);
|
||||
datarouter_port_add_handler(p, uart_send);
|
||||
|
||||
// 发送
|
||||
datarouter_send_status(p, "status:OK", 9);
|
||||
// 接收
|
||||
datarouter_on_recv_command(p, "reboot", 6);
|
||||
dr_port_remove_handler(p1, tcp_send);
|
||||
// 下次 send_sensor 不再触发 tcp
|
||||
```
|
||||
|
||||
---
|
||||
@@ -451,32 +406,26 @@ Weak ..> Result : 后备
|
||||
|
||||
| 返回值 | 含义 |
|
||||
|:------:|------|
|
||||
| 0 | 成功，所有 handler 被调用 |
|
||||
| 0 | 成功，至少有一个 handler 被调用 |
|
||||
| -1 | 库未初始化（未调 init） |
|
||||
| -2 | 端口无效（越界/未创建/已删除） |
|
||||
| -3 | 端口 send_type 与调用的发送函数不匹配 |
|
||||
| -4 | 端口 handler 列表为空（count == 0） |
|
||||
| -2 | 无端口匹配该 send_type（或匹配端口均无 handler） |
|
||||
|
||||
---
|
||||
|
||||
## 11. 配置扩展
|
||||
|
||||
### 增加能力
|
||||
|
||||
```c
|
||||
#define DATAROUTER_SEND_CAPABILITIES \
|
||||
DATAROUTER_SEND(sensor, "Sensor data") \
|
||||
DATAROUTER_SEND(debug, "Debug log") /* 新增发送能力 */
|
||||
#define DR_SEND_CAPABILITIES \
|
||||
DR_SEND(sensor, "Sensor data") \
|
||||
DR_SEND(debug, "Debug log") /* 新增 */
|
||||
|
||||
#define DATAROUTER_RECV_CAPABILITIES \
|
||||
DATAROUTER_RECV(rtcm, "RTCM data") \
|
||||
DATAROUTER_RECV(ota, "OTA firmware") /* 新增接收能力 */
|
||||
#define DR_RECV_CAPABILITIES \
|
||||
DR_RECV(rtcm, "RTCM data") \
|
||||
DR_RECV(ota, "OTA firmware") /* 新增 */
|
||||
```
|
||||
|
||||
### 自定义限制
|
||||
|
||||
```bash
|
||||
cmake -DCMAKE_C_FLAGS="-DDATAROUTER_MAX_PORTS=128 -DDATAROUTER_MAX_HANDLERS_PER_PORT=8"
|
||||
cmake -DCMAKE_C_FLAGS="-DDR_MAX_PORTS=128 -DDR_MAX_HANDLERS_PER_PORT=8"
|
||||
```
|
||||
|
||||
---
|
||||
|
||||
@@ -1,40 +1,37 @@
|
||||
# DataRouter
|
||||
|
||||
轻量级 C 语言数据路由库。**发送能力和接收能力分开声明**，端口独立设置 send_type 和 recv_type，支持多外设一对多广播路由。
|
||||
轻量级 C 语言数据路由库。**发送能力和接收能力分开声明**，端口绑定 `send_type` 和外设 handler 列表。调用 `dr_send_<id>(data, len)` 时自动广播到所有匹配端口。
|
||||
|
||||
## 概念
|
||||
|
||||
| 术语 | 说明 |
|
||||
|------|------|
|
||||
| **发送能力 (Send Capability)** | 编译期声明的可发送报文类型，生成 `datarouter_send_<id>()` |
|
||||
| **接收能力 (Recv Capability)** | 编译期声明的可接收报文类型，生成 `datarouter_on_recv_<id>()` |
|
||||
| **端口 (Port)** | 运行期连接点，独立设置 send_type + recv_type + handler 列表 |
|
||||
| **发送能力 (Send Capability)** | 编译期声明的可发送报文类型，生成 `dr_send_<id>(data, len)` |
|
||||
| **接收能力 (Recv Capability)** | 编译期声明的可接收报文类型，生成 `dr_on_recv_<id>(port, data, len)` |
|
||||
| **端口 (Port)** | 运行期创建的连接点，包含 `send_type` + handler 列表 |
|
||||
| **Handler** | 用户实现的物理外设发送函数，一个端口可注册多个（默认上限 4） |
|
||||
|
||||
## 快速开始
|
||||
|
||||
### 1. 声明能力
|
||||
|
||||
创建自己的 `datarouter_config.h`（可参考 `datarouter_config_template.h`）：
|
||||
创建自己的 `dr_config.h`（可参考 `dr_config_template.h`）：
|
||||
|
||||
```c
|
||||
#define DATAROUTER_SEND_CAPABILITIES \
|
||||
DATAROUTER_SEND(sensor, "Sensor data report") \
|
||||
DATAROUTER_SEND(status, "Device status report")
|
||||
#define DR_SEND_CAPABILITIES \
|
||||
DR_SEND(sensor, "Sensor data report") \
|
||||
DR_SEND(status, "Device status report")
|
||||
|
||||
#define DATAROUTER_RECV_CAPABILITIES \
|
||||
DATAROUTER_RECV(rtcm, "RTCM correction data") \
|
||||
DATAROUTER_RECV(command, "Remote control command")
|
||||
#define DR_RECV_CAPABILITIES \
|
||||
DR_RECV(rtcm, "RTCM correction data") \
|
||||
DR_RECV(command, "Remote control command")
|
||||
```
|
||||
|
||||
> 库默认自带一份示例配置。将你的 `datarouter_config.h` 放到项目目录，
|
||||
> 编译时添加 `-I /path/to/your/config` 即可覆盖。无需修改库源代码。
|
||||
> 库自带默认配置。将你的 `dr_config.h` 放到项目目录，
|
||||
> 编译时添加 `-I /path/to/your/config` 即可覆盖。无需修改库源码。
|
||||
>
|
||||
> **注意**：确保你的配置目录在包含路径中出现在库目录之前，否则编译 `datarouter.c`
|
||||
> 时仍会使用库的默认配置。在 CMake 中可参考：
|
||||
> ```cmake
|
||||
> # 你的 CMakeLists.txt
|
||||
> include_directories(BEFORE ${CMAKE_CURRENT_SOURCE_DIR}) # 全局优先
|
||||
> include_directories(BEFORE ${CMAKE_CURRENT_SOURCE_DIR})
|
||||
> add_subdirectory(path/to/DataRouter)
|
||||
> target_link_libraries(my_app DataRouter)
|
||||
> ```
|
||||
@@ -54,40 +51,27 @@ static void tcp_send(uint32_t port_id, const void *data, size_t len) {
|
||||
### 3. 创建端口
|
||||
|
||||
```c
|
||||
datarouter_init();
|
||||
dr_init();
|
||||
|
||||
/* —— 只发送：传感器上报 —— */
|
||||
datarouter_port_t tx = datarouter_port_create();
|
||||
datarouter_port_set_send_type(tx, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(tx, uart_send);
|
||||
datarouter_port_add_handler(tx, tcp_send);
|
||||
datarouter_send_sensor(tx, "temperature:25.3", 16); // → UART + TCP
|
||||
/* —— 传感器上报：sensor 报文走 UART + TCP —— */
|
||||
dr_port_t tx = dr_port_create();
|
||||
dr_port_set_send_type(tx, DR_SEND_sensor);
|
||||
dr_port_add_handler(tx, uart_send);
|
||||
dr_port_add_handler(tx, tcp_send);
|
||||
|
||||
/* —— 只接收：RTCM 修正 —— */
|
||||
datarouter_port_t rx = datarouter_port_create();
|
||||
datarouter_port_set_recv_type(rx, DATAROUTER_RECV_rtcm);
|
||||
// 外设收到数据后由用户调回调:
|
||||
datarouter_on_recv_rtcm(rx, data, len);
|
||||
/* 不指定端口，库自动广播到所有 send_type=sensor 的端口 */
|
||||
dr_send_sensor("temperature:25.3", 16); // → UART + TCP
|
||||
|
||||
/* —— 同时收发：状态上报 + 命令接收 —— */
|
||||
datarouter_port_t bi = datarouter_port_create();
|
||||
datarouter_port_set_send_type(bi, DATAROUTER_SEND_status);
|
||||
datarouter_port_set_recv_type(bi, DATAROUTER_RECV_command);
|
||||
datarouter_port_add_handler(bi, uart_send);
|
||||
datarouter_send_status(bi, "status:OK", 9);
|
||||
datarouter_on_recv_command(bi, "reboot", 6);
|
||||
/* —— 接收：实现回调，外设数据到达后自行调用 —— */
|
||||
dr_on_recv_rtcm(rx_port, data, len);
|
||||
```
|
||||
|
||||
### 4. 实现接收回调
|
||||
|
||||
```c
|
||||
void datarouter_on_recv_rtcm(uint32_t port_id, const void *data, size_t len) {
|
||||
void dr_on_recv_rtcm(uint32_t port_id, const void *data, size_t len) {
|
||||
apply_rtcm_correction(data, len);
|
||||
}
|
||||
|
||||
void datarouter_on_recv_command(uint32_t port_id, const void *data, size_t len) {
|
||||
execute_command(data, len);
|
||||
}
|
||||
```
|
||||
|
||||
## API 一览
|
||||
@@ -95,41 +79,40 @@ void datarouter_on_recv_command(uint32_t port_id, const void *data, size_t len)
|
||||
### 初始化
|
||||
|
||||
```c
|
||||
void datarouter_init(void); // 幂等初始化
|
||||
void datarouter_reset(void); // 重置全部状态
|
||||
void dr_init(void); // 幂等初始化
|
||||
void dr_reset(void); // 重置全部状态
|
||||
```
|
||||
|
||||
### 端口管理
|
||||
|
||||
```c
|
||||
datarouter_port_t datarouter_port_create(void); // 创建端口
|
||||
void datarouter_port_delete(datarouter_port_t port); // 删除
|
||||
dr_port_t dr_port_create(void); // 创建端口
|
||||
void dr_port_delete(dr_port_t port); // 删除
|
||||
|
||||
void datarouter_port_set_send_type(port, int cap_id); // 设置发送类型
|
||||
int datarouter_port_get_send_type(port); // -1 = 未设置
|
||||
void datarouter_port_set_recv_type(port, int cap_id); // 设置接收类型
|
||||
int datarouter_port_get_recv_type(port); // -1 = 未设置
|
||||
void dr_port_set_send_type(port, int cap_id); // 设置发送类型
|
||||
int dr_port_get_send_type(port); // -1 = 未设置
|
||||
|
||||
int datarouter_port_add_handler(port, handler); // 注册外设 handler
|
||||
int datarouter_port_remove_handler(port, handler); // 移除
|
||||
void datarouter_port_clear_handlers(port); // 清除全部
|
||||
int datarouter_port_handler_count(port); // 当前数量
|
||||
int dr_port_add_handler(port, handler); // 注册外设 handler
|
||||
int dr_port_remove_handler(port, handler); // 移除
|
||||
void dr_port_clear_handlers(port); // 清除全部
|
||||
int dr_port_handler_count(port); // 当前数量
|
||||
```
|
||||
|
||||
### 发送触发（每个 SEND 能力生成一个）
|
||||
|
||||
```c
|
||||
int datarouter_send_sensor(port, data, len); // 0 成功 / -1 未初始化
|
||||
int datarouter_send_status(port, data, len); // -2 端口无效
|
||||
// -3 send_type 不匹配
|
||||
// -4 无 handler
|
||||
int dr_send_sensor(const void *data, size_t len); // 0 成功
|
||||
int dr_send_status(const void *data, size_t len); // -1 未初始化
|
||||
// -2 无匹配端口
|
||||
```
|
||||
|
||||
不指定端口，库遍历所有端口，`send_type` 匹配的逐一调用其全部 handler。
|
||||
|
||||
### 接收回调（每个 RECV 能力生成一个声明）
|
||||
|
||||
```c
|
||||
void datarouter_on_recv_rtcm(uint32_t port_id, const void *data, size_t len);
|
||||
void datarouter_on_recv_command(uint32_t port_id, const void *data, size_t len);
|
||||
void dr_on_recv_rtcm(uint32_t port_id, const void *data, size_t len);
|
||||
void dr_on_recv_command(uint32_t port_id, const void *data, size_t len);
|
||||
```
|
||||
|
||||
库提供弱符号默认空实现，用户定义同名函数覆盖。
|
||||
@@ -137,29 +120,30 @@ void datarouter_on_recv_command(uint32_t port_id, const void *data, size_t len);
|
||||
### 能力元数据（两组独立）
|
||||
|
||||
```c
|
||||
int datarouter_send_cap_count(void);
|
||||
const char *datarouter_send_cap_name(int cap_id);
|
||||
const char *datarouter_send_cap_desc(int cap_id);
|
||||
int dr_send_cap_count(void);
|
||||
const char *dr_send_cap_name(int cap_id);
|
||||
const char *dr_send_cap_desc(int cap_id);
|
||||
|
||||
int datarouter_recv_cap_count(void);
|
||||
const char *datarouter_recv_cap_name(int cap_id);
|
||||
const char *datarouter_recv_cap_desc(int cap_id);
|
||||
int dr_recv_cap_count(void);
|
||||
const char *dr_recv_cap_name(int cap_id);
|
||||
const char *dr_recv_cap_desc(int cap_id);
|
||||
```
|
||||
|
||||
## 路由模型
|
||||
|
||||
```
|
||||
send_sensor(port, data, len)
|
||||
dr_send_sensor("temperature:25.3", 16)
|
||||
│
|
||||
├─→ handler[0] = uart_send → UART
|
||||
├─→ handler[1] = tcp_send → TCP
|
||||
└─→ handler[2] = can_send → CAN
|
||||
├─→ port 0 (send_type=sensor) handlers[0]=uart_send → UART
|
||||
│ handlers[1]=tcp_send → TCP
|
||||
└─→ port 1 (send_type=sensor) handlers[0]=can_send → CAN
|
||||
```
|
||||
|
||||
- 一个端口可注册多个 handler（一对多广播）
|
||||
- 调用 `send_<id>(data, len)` 时，库遍历所有端口，自动匹配 `send_type`
|
||||
- 每个端口可注册多个 handler（一对多广播）
|
||||
- 同一 handler 可注册到多个端口（多路复用）
|
||||
- 运行时通过 `add_handler` / `remove_handler` 动态改变路由
|
||||
- 清空 handler 列表后发送返回 -4
|
||||
- 运行时通过 `add_handler` / `remove_handler` / `port_delete` 动态改变路由
|
||||
- 无任何端口匹配该 `send_type` 时返回 -2
|
||||
|
||||
## 编译
|
||||
|
||||
@@ -171,9 +155,65 @@ cmake --build build
|
||||
可选配置：
|
||||
|
||||
```bash
|
||||
cmake -DCMAKE_C_FLAGS="-DDATAROUTER_MAX_PORTS=128 -DDATAROUTER_MAX_HANDLERS_PER_PORT=8"
|
||||
cmake -DCMAKE_C_FLAGS="-DDR_MAX_PORTS=128 -DDR_MAX_HANDLERS_PER_PORT=8"
|
||||
```
|
||||
|
||||
## 嵌入式 / Cortex-M 构建
|
||||
|
||||
库支持 `arm-none-eabi-gcc` 交叉编译，提供 **7 个 CMake preset** 覆盖常见 Cortex-M 目标：
|
||||
|
||||
```bash
|
||||
# 列出所有 preset
|
||||
cmake --list-presets
|
||||
|
||||
# Cortex-M3（软浮点）
|
||||
cmake --preset cm3
|
||||
cmake --build --preset cm3
|
||||
|
||||
# Cortex-M4F（硬件浮点，单精度）
|
||||
cmake --preset cm4-hard
|
||||
cmake --build --preset cm4-hard
|
||||
|
||||
# Cortex-M7F（硬件浮点，双精度）
|
||||
cmake --preset cm7-hard-dp
|
||||
cmake --build --preset cm7-hard-dp
|
||||
```
|
||||
|
||||
> 使用 preset 编译需要 `arm-none-eabi-gcc` 在 PATH 中。
|
||||
> 各 preset 均启用 `DR_SOURCE_ONLY` 模式——只提供源文件路径，
|
||||
> 你需要将 `datarouter.c` 加入自己的 target 以继承项目编译标志：
|
||||
|
||||
```cmake
|
||||
# 你的 CMakeLists.txt
|
||||
set(DR_SOURCE_ONLY ON)
|
||||
FetchContent_MakeAvailable(datarouter)
|
||||
target_sources(my_app PRIVATE ${datarouter_SOURCE_DIR}/datarouter.c)
|
||||
target_include_directories(my_app PRIVATE ${datarouter_SOURCE_DIR})
|
||||
```
|
||||
|
||||
### 编译兼容性矩阵
|
||||
|
||||
启用 `DR_COMPILE_CHECK` 可自动检测 `arm-none-eabi-gcc` 并对 CM3/CM4/CM7
|
||||
各变体执行编译验证：
|
||||
|
||||
```bash
|
||||
cmake -B build-check -DDR_COMPILE_CHECK=ON
|
||||
cmake --build build-check # 生成 check_cm3, check_cm4-hard, … 等 target
|
||||
# 或单独检查某个变体：
|
||||
make check_cm7-hard-dp
|
||||
```
|
||||
|
||||
### 内置 CMake Preset 列表
|
||||
|
||||
| Preset | 目标 | FPU | ABI |
|
||||
|--------|------|-----|-----|
|
||||
| `cm3` | Cortex-M3 | 无 | soft |
|
||||
| `cm4-soft` | Cortex-M4 | 无 | soft |
|
||||
| `cm4-hard` | Cortex-M4F | FPv4-SP-D16 | hard |
|
||||
| `cm7-soft` | Cortex-M7 | 无 | soft |
|
||||
| `cm7-hard-sp` | Cortex-M7F | FPv5-SP-D16 | hard |
|
||||
| `cm7-hard-dp` | Cortex-M7F | FPv5-D16 | hard |
|
||||
|
||||
## 测试
|
||||
|
||||
```bash
|
||||
@@ -183,16 +223,17 @@ ctest --test-dir build
|
||||
./build/test_datarouter
|
||||
```
|
||||
|
||||
当前 27 个测试用例，覆盖端口管理、send_type/recv_type 独立设置、handler 增删、一对多广播、接收回调、能力元数据、错误边界。
|
||||
当前 22 个测试用例，覆盖端口管理、send_type 与 handler 设置、自动广播路由、接收回调、能力元数据。
|
||||
|
||||
## 文件结构
|
||||
|
||||
```
|
||||
datarouter_config.h 发送 + 接收能力配置（用户编辑）
|
||||
dr_config.h 发送 + 接收能力配置（用户可覆盖）
|
||||
datarouter.h 公共 API + X-macro 展开
|
||||
datarouter.c 实现（端口表 + handler 遍历）
|
||||
example.c 收发分离使用示例
|
||||
tests/test_datarouter.c 单元测试（27 用例）
|
||||
datarouter.c 实现（端口表 + send 遍历）
|
||||
dr_config_template.h 外部配置模板
|
||||
example.c 使用示例
|
||||
tests/test_datarouter.c 单元测试（22 用例）
|
||||
DESIGN.md 详细设计文档（含 PlantUML 图）
|
||||
TEST_CASES.md 测试用例文档
|
||||
```
|
||||
|
||||
+27
-45
@@ -17,7 +17,6 @@
|
||||
cmake -S . -B build
|
||||
cmake --build build
|
||||
ctest --test-dir build
|
||||
# 或直接运行:
|
||||
./build/test_datarouter
|
||||
```
|
||||
|
||||
@@ -27,68 +26,53 @@ ctest --test-dir build
|
||||
|
||||
| # | 测试名 | 描述 | 步骤 | 预期 |
|
||||
|---|--------|------|------|------|
|
||||
| 1 | `error_uninit` | 未 init 时发送 | 不调 init 直接 `send_sensor(0, ...)` | 返回 -1 |
|
||||
| 1 | `error_uninit` | 未 init 时发送 | `send_sensor("d", 1)` | 返回 -1 |
|
||||
|
||||
### 2. 端口管理（4 个）
|
||||
|
||||
| # | 测试名 | 描述 | 步骤 | 预期 |
|
||||
|---|--------|------|------|------|
|
||||
| 2 | `port_create_basic` | 基本创建 | `port_create()` | 返回 ≥ 0 |
|
||||
| 3 | `port_create_max` | 满容量（64） | 循环创建到满再尝试 | 64 个成功，第 65 个 INVALID |
|
||||
| 3 | `port_create_max` | 满容量 64 | 循环创建到满再尝试 | 64 个成功，第 65 个 INVALID |
|
||||
| 4 | `port_delete_invalid` | 删除无效 ID | `delete(-1)` + `delete(999)` | 不崩溃 |
|
||||
| 5 | `port_default_state` | 默认状态 | 创建端口，查 send/recv/handler | send_type=-1, recv_type=-1, count=0 |
|
||||
| 5 | `port_default_state` | 默认状态 | 新建端口，查 send_type / handler count | `send_type=-1`, `count=0` |
|
||||
|
||||
### 3. send_type / recv_type 独立设置（6 个）
|
||||
### 3. send_type 与 handler（3 个）
|
||||
|
||||
| # | 测试名 | 描述 | 步骤 | 预期 |
|
||||
|---|--------|------|------|------|
|
||||
| 6 | `send_type_set_get` | 设置发送类型 | `set_send_type(sensor)` → `get_send_type()` | 返回 sensor |
|
||||
| 7 | `recv_type_set_get` | 设置接收类型 | `set_recv_type(rtcm)` → `get_recv_type()` | 返回 rtcm |
|
||||
| 8 | `types_independent` | 收发互不干扰 | 同时 `set_send_type(sensor)` + `set_recv_type(command)` | get_send=sensor, get_recv=command |
|
||||
| 9 | `send_type_clear` | 清除发送类型 | `set_send_type(sensor)` → `set_send_type(-1)` | `get_send_type()` == -1 |
|
||||
| 10 | `recv_type_clear` | 清除接收类型 | `set_recv_type(rtcm)` → `set_recv_type(-1)` | `get_recv_type()` == -1 |
|
||||
| 11 | `types_from_invalid` | 无效端口查类型 | `get_send_type(-1/999)` / `get_recv_type(-1/999)` | 均返回 -1 |
|
||||
| 6 | `send_type_set_get` | 设置并清除 send_type | `set_send_type(sensor)` → `get` → `set(-1)` → `get` | sensor → -1 |
|
||||
| 7 | `handler_add_remove` | 添加后移除 handler | add(h) count=1 → remove(h) count=0 | count 正确 |
|
||||
| 8 | `handler_clear` | 清除全部 handler | add → clear | count == 0 |
|
||||
|
||||
### 4. handler 增删（2 个）
|
||||
### 4. 发送 — 自动广播（11 个）
|
||||
|
||||
| # | 测试名 | 描述 | 步骤 | 预期 |
|
||||
|---|--------|------|------|------|
|
||||
| 12 | `handler_add_remove` | 添加后移除 | ① add(a) add(b) count=2 ② remove(a) count=1 | count 正确 |
|
||||
| 13 | `handler_clear` | 清除全部 | add 后 clear | count == 0 |
|
||||
| 9 | `send_no_match_port` | 无匹配端口 | 不创建任何端口，直接 `send_sensor` | 返回 -2 |
|
||||
| 10 | `send_one_port_one_handler` | 单端口单 handler | 创建端口中 send_type + add(h) → send | 返回 0；handler 1 次 |
|
||||
| 11 | `send_one_port_multi_handler` | 单端口双 handler | add(h) + add(h2) → send | handler 2 次 |
|
||||
| 12 | `send_multi_ports_same_type` | 两端口同类型 | p1(sensor,h) + p2(sensor,h) → send | handler 2 次，各端口一次 |
|
||||
| 13 | `send_multi_port_multi_handler` | 多端口多 handler | p1(h,h2) + p2(h3) → send | handler 3 次 |
|
||||
| 14 | `send_type_filter` | 类型过滤 | p1(sensor,h) + p2(status,h) → `send_sensor` | 只触发 p1 |
|
||||
| 15 | `send_after_remove_handler` | 移除 handler 后 | add(h) → send count=1 → remove(h) → send | 第二次返回 -2 |
|
||||
| 16 | `send_after_delete_port` | 删除端口后 | 创建→设好→删除→send | 返回 -2 |
|
||||
| 17 | `send_zero_length` | 零长度数据 | send("x", 0) | 返回 0；handler 被调 |
|
||||
| 18 | `send_null_data` | NULL 数据 | send(NULL, 0) | 返回 0；handler 被调 |
|
||||
| 19 | `send_multi_cap` | 多能力独立 | p1(sensor) + p2(status) → 分别 send_sensor + send_status | 各触发匹配的端口 |
|
||||
|
||||
### 5. 发送触发（9 个）
|
||||
### 5. 接收回调（1 个）
|
||||
|
||||
| # | 测试名 | 描述 | 步骤 | 预期 |
|
||||
|---|--------|------|------|------|
|
||||
| 14 | `send_one_handler` | 单 handler 发送 | send_type + add_handler → send_sensor | 返回 0；handler 被调用 1 次 |
|
||||
| 15 | `send_multi_handlers` | 三个 handler 广播 | 注册 3 个 handler 后 send | 返回 0；handler 被调用 3 次 |
|
||||
| 16 | `send_type_mismatch` | 发送类型不匹配 | set_send_type(sensor) 但调用 send_status | 返回 -3；handler 不被调用 |
|
||||
| 17 | `send_no_handler` | 未注册 handler | 只 set_send_type 不 add_handler | 返回 -4 |
|
||||
| 18 | `send_no_send_type` | 没有 send_type | 端口只有 recv_type，调 send_sensor | 返回 -3 |
|
||||
| 19 | `send_remove_handler` | 移除后少广播 | 注册 2 handler → send count=2 → remove 1 → send count=1 | 数量正确 |
|
||||
| 20 | `send_clear_handlers` | 清空后无法发送 | add → clear → send | 返回 -4 |
|
||||
| 21 | `send_zero_length` | 零长度数据 | send(port, "x", 0) | 返回 0；handler 被调用 |
|
||||
| 22 | `send_null_data` | NULL 数据 | send(port, NULL, 0) | 返回 0；handler 被调用 |
|
||||
| 20 | `recv_callback` | 用户实现接收回调 | `on_recv_rtcm(0, "d", 1)` | 回调被触发 |
|
||||
|
||||
### 6. 接收回调（1 个）
|
||||
### 6. 能力元数据（2 个）
|
||||
|
||||
| # | 测试名 | 描述 | 步骤 | 预期 |
|
||||
|---|--------|------|------|------|
|
||||
| 23 | `recv_callbacks` | 用户实现接收回调 | ① `on_recv_rtcm(0, ...)` ② `on_recv_command(1, ...)` | 各自触发，互不干扰 |
|
||||
|
||||
### 7. 能力元数据（2 个）
|
||||
|
||||
| # | 测试名 | 描述 | 步骤 | 预期 |
|
||||
|---|--------|------|------|------|
|
||||
| 24 | `send_cap_meta` | 发送能力元数据 | 查 count / name / desc / 边界 | SEND 两组正确 |
|
||||
| 25 | `recv_cap_meta` | 接收能力元数据 | 查 count / name / desc / 边界 | RECV 两组正确 |
|
||||
|
||||
### 8. 错误处理（2 个）
|
||||
|
||||
| # | 测试名 | 描述 | 步骤 | 预期 |
|
||||
|---|--------|------|------|------|
|
||||
| 26 | `error_invalid_port` | 无效端口 | `send_sensor(999/-1, ...)` | 均返回 -2 |
|
||||
| 27 | `error_deleted_port` | 已删除端口 | 创建→设好→删除→send | 返回 -2 |
|
||||
| 21 | `send_cap_meta` | 发送能力元数据 | count / name / desc / 边界 | SEND 两组正确 |
|
||||
| 22 | `recv_cap_meta` | 接收能力元数据 | count / name / desc / 边界 | RECV 两组正确 |
|
||||
|
||||
## 覆盖矩阵
|
||||
|
||||
@@ -96,11 +80,9 @@ ctest --test-dir build
|
||||
|----------|:------:|------------|
|
||||
| 未初始化 | 1 | send → -1 |
|
||||
| 端口管理 | 4 | 创建/满容量/删除异常/默认状态 |
|
||||
| send_type / recv_type | 6 | 设置/清除/独立/无效端口 |
|
||||
| handler 增删 | 2 | 添加/移除/清空 |
|
||||
| 发送触发 | 9 | 单播/多播/类型不匹配/无handler/无send_type/移除后/清空后/零长/NULL |
|
||||
| send_type & handler | 3 | 设置/清除/添加/移除/清空 |
|
||||
| 发送自动广播 | 11 | 无匹配/单播/多 handler 单端口/多端口同类型/多端口多 handler/类型过滤/移除后/删除后/零长/NULL/多能力独立 |
|
||||
| 接收回调 | 1 | 用户实现覆盖弱符号 |
|
||||
| 能力元数据 | 2 | SEND 与 RECV 两组独立查询 |
|
||||
| 错误处理 | 2 | 无效端口/已删除端口 |
|
||||
|
||||
**总计：27 个测试用例**
|
||||
**总计：22 个测试用例**
|
||||
|
||||
@@ -0,0 +1,40 @@
|
||||
|
||||
####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() #######
|
||||
####### Any changes to this file will be overwritten by the next CMake run ####
|
||||
####### The input file was DataRouterConfig.cmake.in ########
|
||||
|
||||
get_filename_component(PACKAGE_PREFIX_DIR "${CMAKE_CURRENT_LIST_DIR}/../" ABSOLUTE)
|
||||
|
||||
macro(set_and_check _var _file)
|
||||
set(${_var} "${_file}")
|
||||
if(NOT EXISTS "${_file}")
|
||||
message(FATAL_ERROR "File or directory ${_file} referenced by variable ${_var} does not exist !")
|
||||
endif()
|
||||
endmacro()
|
||||
|
||||
macro(check_required_components _NAME)
|
||||
foreach(comp ${${_NAME}_FIND_COMPONENTS})
|
||||
if(NOT ${_NAME}_${comp}_FOUND)
|
||||
if(${_NAME}_FIND_REQUIRED_${comp})
|
||||
set(${_NAME}_FOUND FALSE)
|
||||
endif()
|
||||
endif()
|
||||
endforeach()
|
||||
endmacro()
|
||||
|
||||
####################################################################################
|
||||
|
||||
set_and_check(DataRouter_INCLUDE_DIR "${PACKAGE_PREFIX_DIR}/include")
|
||||
set_and_check(DataRouter_LIBRARY_DIR "${PACKAGE_PREFIX_DIR}/lib")
|
||||
|
||||
include("${CMAKE_CURRENT_LIST_DIR}/DataRouterTargets.cmake" OPTIONAL)
|
||||
|
||||
if(NOT TARGET DataRouter::DataRouter)
|
||||
add_library(DataRouter::DataRouter STATIC IMPORTED)
|
||||
set_target_properties(DataRouter::DataRouter PROPERTIES
|
||||
IMPORTED_LOCATION "${DataRouter_LIBRARY_DIR}/${CMAKE_STATIC_LIBRARY_PREFIX}DataRouter${CMAKE_STATIC_LIBRARY_SUFFIX}"
|
||||
INTERFACE_INCLUDE_DIRECTORIES "${DataRouter_INCLUDE_DIR}"
|
||||
)
|
||||
endif()
|
||||
|
||||
check_required_components(DataRouter)
|
||||
Binary file not shown.
Binary file not shown.
@@ -1,7 +1,7 @@
|
||||
@PACKAGE_INIT@
|
||||
|
||||
set_and_check(DataRouter_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
|
||||
set_and_check(DataRouter_LIBRARY_DIR "@PACKAGE_LIB_INSTALL_DIR@")
|
||||
set(DataRouter_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
|
||||
set(DataRouter_LIBRARY_DIR "@PACKAGE_LIB_INSTALL_DIR@")
|
||||
|
||||
include("${CMAKE_CURRENT_LIST_DIR}/DataRouterTargets.cmake" OPTIONAL)
|
||||
|
||||
|
||||
+68
-111
@@ -1,167 +1,150 @@
|
||||
/**
|
||||
* @file datarouter.c
|
||||
* @brief 数据路由库 —— 实现
|
||||
*/
|
||||
|
||||
#include "datarouter.h"
|
||||
#include <string.h>
|
||||
|
||||
#if defined(__GNUC__) || defined(__clang__)
|
||||
#define DATAROUTER_WEAK __attribute__((weak))
|
||||
#define DR_WEAK __attribute__((weak))
|
||||
#else
|
||||
#define DATAROUTER_WEAK
|
||||
#define DR_WEAK
|
||||
#endif
|
||||
|
||||
#ifndef DATAROUTER_MAX_PORTS
|
||||
#define DATAROUTER_MAX_PORTS 64
|
||||
#ifndef DR_MAX_PORTS
|
||||
#define DR_MAX_PORTS 64
|
||||
#endif
|
||||
|
||||
typedef struct {
|
||||
int send_type;
|
||||
int recv_type;
|
||||
datarouter_send_handler_t handlers[DATAROUTER_MAX_HANDLERS_PER_PORT];
|
||||
dr_send_handler_t handlers[DR_MAX_HANDLERS_PER_PORT];
|
||||
int count;
|
||||
uint8_t in_use;
|
||||
} port_entry_t;
|
||||
|
||||
static port_entry_t ports[DATAROUTER_MAX_PORTS];
|
||||
static port_entry_t ports[DR_MAX_PORTS];
|
||||
static uint8_t initialized;
|
||||
|
||||
/* ---- 发送能力元数据 ---- */
|
||||
/* ---- 元数据 ---- */
|
||||
|
||||
static const char *send_names[] = {
|
||||
#define DATAROUTER_SEND(id, desc) #id,
|
||||
DATAROUTER_SEND_CAPABILITIES
|
||||
#undef DATAROUTER_SEND
|
||||
#define DR_SEND(id, desc) #id,
|
||||
DR_SEND_CAPABILITIES
|
||||
#undef DR_SEND
|
||||
};
|
||||
|
||||
static const char *send_descs[] = {
|
||||
#define DATAROUTER_SEND(id, desc) desc,
|
||||
DATAROUTER_SEND_CAPABILITIES
|
||||
#undef DATAROUTER_SEND
|
||||
#define DR_SEND(id, desc) desc,
|
||||
DR_SEND_CAPABILITIES
|
||||
#undef DR_SEND
|
||||
};
|
||||
|
||||
/* ---- 接收能力元数据 ---- */
|
||||
|
||||
static const char *recv_names[] = {
|
||||
#define DATAROUTER_RECV(id, desc) #id,
|
||||
DATAROUTER_RECV_CAPABILITIES
|
||||
#undef DATAROUTER_RECV
|
||||
#define DR_RECV(id, desc) #id,
|
||||
DR_RECV_CAPABILITIES
|
||||
#undef DR_RECV
|
||||
};
|
||||
|
||||
static const char *recv_descs[] = {
|
||||
#define DATAROUTER_RECV(id, desc) desc,
|
||||
DATAROUTER_RECV_CAPABILITIES
|
||||
#undef DATAROUTER_RECV
|
||||
#define DR_RECV(id, desc) desc,
|
||||
DR_RECV_CAPABILITIES
|
||||
#undef DR_RECV
|
||||
};
|
||||
|
||||
/* ---- 弱符号接收回调默认实现 ---- */
|
||||
/* ---- 弱符号接收回调 ---- */
|
||||
|
||||
#define DATAROUTER_RECV(id, desc) \
|
||||
DATAROUTER_WEAK void datarouter_on_recv_##id( \
|
||||
#define DR_RECV(id, desc) \
|
||||
DR_WEAK void dr_on_recv_##id( \
|
||||
uint32_t port_id, const void *data, size_t len) \
|
||||
{ \
|
||||
(void)port_id; (void)data; (void)len; \
|
||||
}
|
||||
DATAROUTER_RECV_CAPABILITIES
|
||||
#undef DATAROUTER_RECV
|
||||
{ (void)port_id; (void)data; (void)len; }
|
||||
DR_RECV_CAPABILITIES
|
||||
#undef DR_RECV
|
||||
|
||||
/* ---- 发送触发函数实现 ---- */
|
||||
/* ---- 发送触发函数 ---- */
|
||||
|
||||
#define DATAROUTER_SEND(id, desc) \
|
||||
int datarouter_send_##id(uint32_t port_id, const void *data, size_t len) \
|
||||
#define DR_SEND(id, desc) \
|
||||
int dr_send_##id(const void *data, size_t len) \
|
||||
{ \
|
||||
if (!initialized) return -1; \
|
||||
if (port_id >= DATAROUTER_MAX_PORTS || !ports[port_id].in_use) return -2; \
|
||||
if (ports[port_id].send_type != DATAROUTER_SEND_##id) return -3; \
|
||||
if (ports[port_id].count == 0) return -4; \
|
||||
for (int _i = 0; _i < ports[port_id].count; _i++) \
|
||||
ports[port_id].handlers[_i](port_id, data, len); \
|
||||
return 0; \
|
||||
int called = 0; \
|
||||
for (uint32_t _p = 0; _p < DR_MAX_PORTS; _p++) { \
|
||||
if (!ports[_p].in_use) continue; \
|
||||
if (ports[_p].send_type != DR_SEND_##id) continue; \
|
||||
for (int _h = 0; _h < ports[_p].count; _h++) { \
|
||||
ports[_p].handlers[_h](_p, data, len); \
|
||||
called = 1; \
|
||||
} \
|
||||
} \
|
||||
return called ? 0 : -2; \
|
||||
}
|
||||
DATAROUTER_SEND_CAPABILITIES
|
||||
#undef DATAROUTER_SEND
|
||||
DR_SEND_CAPABILITIES
|
||||
#undef DR_SEND
|
||||
|
||||
/* ---- 端口管理 ---- */
|
||||
|
||||
void datarouter_init(void)
|
||||
void dr_init(void)
|
||||
{
|
||||
if (initialized) return;
|
||||
memset(ports, 0, sizeof(ports));
|
||||
initialized = 1;
|
||||
}
|
||||
|
||||
void datarouter_reset(void)
|
||||
void dr_reset(void)
|
||||
{
|
||||
initialized = 0;
|
||||
memset(ports, 0, sizeof(ports));
|
||||
}
|
||||
|
||||
datarouter_port_t datarouter_port_create(void)
|
||||
dr_port_t dr_port_create(void)
|
||||
{
|
||||
if (!initialized) return DATAROUTER_INVALID_PORT;
|
||||
for (int i = 0; i < DATAROUTER_MAX_PORTS; i++) {
|
||||
if (!initialized) return DR_INVALID_PORT;
|
||||
for (int i = 0; i < DR_MAX_PORTS; i++) {
|
||||
if (!ports[i].in_use) {
|
||||
ports[i].in_use = 1;
|
||||
ports[i].send_type = -1;
|
||||
ports[i].recv_type = -1;
|
||||
ports[i].count = 0;
|
||||
return (datarouter_port_t)i;
|
||||
return (dr_port_t)i;
|
||||
}
|
||||
}
|
||||
return DATAROUTER_INVALID_PORT;
|
||||
return DR_INVALID_PORT;
|
||||
}
|
||||
|
||||
void datarouter_port_delete(datarouter_port_t port)
|
||||
void dr_port_delete(dr_port_t port)
|
||||
{
|
||||
if (!initialized) return;
|
||||
if (port < 0 || port >= DATAROUTER_MAX_PORTS) return;
|
||||
if (port < 0 || port >= DR_MAX_PORTS) return;
|
||||
ports[port].in_use = 0;
|
||||
}
|
||||
|
||||
void datarouter_port_set_send_type(datarouter_port_t port, int cap_id)
|
||||
void dr_port_set_send_type(dr_port_t port, int cap_id)
|
||||
{
|
||||
if (!initialized) return;
|
||||
if (port < 0 || port >= DATAROUTER_MAX_PORTS || !ports[port].in_use) return;
|
||||
if (port < 0 || port >= DR_MAX_PORTS || !ports[port].in_use) return;
|
||||
ports[port].send_type = cap_id;
|
||||
}
|
||||
|
||||
int datarouter_port_get_send_type(datarouter_port_t port)
|
||||
int dr_port_get_send_type(dr_port_t port)
|
||||
{
|
||||
if (!initialized) return -1;
|
||||
if (port < 0 || port >= DATAROUTER_MAX_PORTS || !ports[port].in_use) return -1;
|
||||
if (port < 0 || port >= DR_MAX_PORTS || !ports[port].in_use) return -1;
|
||||
return ports[port].send_type;
|
||||
}
|
||||
|
||||
void datarouter_port_set_recv_type(datarouter_port_t port, int cap_id)
|
||||
{
|
||||
if (!initialized) return;
|
||||
if (port < 0 || port >= DATAROUTER_MAX_PORTS || !ports[port].in_use) return;
|
||||
ports[port].recv_type = cap_id;
|
||||
}
|
||||
|
||||
int datarouter_port_get_recv_type(datarouter_port_t port)
|
||||
int dr_port_add_handler(dr_port_t port, dr_send_handler_t handler)
|
||||
{
|
||||
if (!initialized) return -1;
|
||||
if (port < 0 || port >= DATAROUTER_MAX_PORTS || !ports[port].in_use) return -1;
|
||||
return ports[port].recv_type;
|
||||
}
|
||||
|
||||
int datarouter_port_add_handler(datarouter_port_t port, datarouter_send_handler_t handler)
|
||||
{
|
||||
if (!initialized) return -1;
|
||||
if (port < 0 || port >= DATAROUTER_MAX_PORTS || !ports[port].in_use) return -1;
|
||||
if (ports[port].count >= DATAROUTER_MAX_HANDLERS_PER_PORT) return -2;
|
||||
if (port < 0 || port >= DR_MAX_PORTS || !ports[port].in_use) return -1;
|
||||
if (ports[port].count >= DR_MAX_HANDLERS_PER_PORT) return -2;
|
||||
for (int i = 0; i < ports[port].count; i++)
|
||||
if (ports[port].handlers[i] == handler) return -3;
|
||||
ports[port].handlers[ports[port].count++] = handler;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int datarouter_port_remove_handler(datarouter_port_t port, datarouter_send_handler_t handler)
|
||||
int dr_port_remove_handler(dr_port_t port, dr_send_handler_t handler)
|
||||
{
|
||||
if (!initialized) return -1;
|
||||
if (port < 0 || port >= DATAROUTER_MAX_PORTS || !ports[port].in_use) return -1;
|
||||
if (port < 0 || port >= DR_MAX_PORTS || !ports[port].in_use) return -1;
|
||||
for (int i = 0; i < ports[port].count; i++) {
|
||||
if (ports[port].handlers[i] == handler) {
|
||||
ports[port].handlers[i] = ports[port].handlers[--ports[port].count];
|
||||
@@ -171,52 +154,26 @@ int datarouter_port_remove_handler(datarouter_port_t port, datarouter_send_handl
|
||||
return -2;
|
||||
}
|
||||
|
||||
void datarouter_port_clear_handlers(datarouter_port_t port)
|
||||
void dr_port_clear_handlers(dr_port_t port)
|
||||
{
|
||||
if (!initialized) return;
|
||||
if (port < 0 || port >= DATAROUTER_MAX_PORTS || !ports[port].in_use) return;
|
||||
if (port < 0 || port >= DR_MAX_PORTS || !ports[port].in_use) return;
|
||||
ports[port].count = 0;
|
||||
}
|
||||
|
||||
int datarouter_port_handler_count(datarouter_port_t port)
|
||||
int dr_port_handler_count(dr_port_t port)
|
||||
{
|
||||
if (!initialized) return -1;
|
||||
if (port < 0 || port >= DATAROUTER_MAX_PORTS || !ports[port].in_use) return -1;
|
||||
if (port < 0 || port >= DR_MAX_PORTS || !ports[port].in_use) return -1;
|
||||
return ports[port].count;
|
||||
}
|
||||
|
||||
/* ---- 元数据查询 ---- */
|
||||
|
||||
int datarouter_send_cap_count(void)
|
||||
{
|
||||
return DATAROUTER_SEND_CAP_COUNT;
|
||||
}
|
||||
int dr_send_cap_count(void) { return DR_SEND_CAP_COUNT; }
|
||||
const char *dr_send_cap_name(int c) { return (c<0||c>=DR_SEND_CAP_COUNT)?NULL:send_names[c]; }
|
||||
const char *dr_send_cap_desc(int c) { return (c<0||c>=DR_SEND_CAP_COUNT)?NULL:send_descs[c]; }
|
||||
|
||||
const char *datarouter_send_cap_name(int cap_id)
|
||||
{
|
||||
if (cap_id < 0 || cap_id >= DATAROUTER_SEND_CAP_COUNT) return NULL;
|
||||
return send_names[cap_id];
|
||||
}
|
||||
|
||||
const char *datarouter_send_cap_desc(int cap_id)
|
||||
{
|
||||
if (cap_id < 0 || cap_id >= DATAROUTER_SEND_CAP_COUNT) return NULL;
|
||||
return send_descs[cap_id];
|
||||
}
|
||||
|
||||
int datarouter_recv_cap_count(void)
|
||||
{
|
||||
return DATAROUTER_RECV_CAP_COUNT;
|
||||
}
|
||||
|
||||
const char *datarouter_recv_cap_name(int cap_id)
|
||||
{
|
||||
if (cap_id < 0 || cap_id >= DATAROUTER_RECV_CAP_COUNT) return NULL;
|
||||
return recv_names[cap_id];
|
||||
}
|
||||
|
||||
const char *datarouter_recv_cap_desc(int cap_id)
|
||||
{
|
||||
if (cap_id < 0 || cap_id >= DATAROUTER_RECV_CAP_COUNT) return NULL;
|
||||
return recv_descs[cap_id];
|
||||
}
|
||||
int dr_recv_cap_count(void) { return DR_RECV_CAP_COUNT; }
|
||||
const char *dr_recv_cap_name(int c) { return (c<0||c>=DR_RECV_CAP_COUNT)?NULL:recv_names[c]; }
|
||||
const char *dr_recv_cap_desc(int c) { return (c<0||c>=DR_RECV_CAP_COUNT)?NULL:recv_descs[c]; }
|
||||
|
||||
+53
-67
@@ -4,36 +4,24 @@
|
||||
*
|
||||
* ## 概念
|
||||
*
|
||||
* - **发送能力 (Send Capability)**：编译期声明的可发送报文类型
|
||||
* - **接收能力 (Recv Capability)**：编译期声明的可接收报文类型
|
||||
* - **端口 (Port)**：运行期连接点，独立设置 send_type + recv_type + 外设 handler 列表
|
||||
* - **发送能力**：编译期声明的可发送报文类型，生成 dr_send_<id>(data, len)
|
||||
* - **接收能力**：编译期声明的可接收报文类型，生成 dr_on_recv_<id>(port, data, len)
|
||||
* - **端口**：运行期创建的连接点，包含 send_type + handler 列表
|
||||
*
|
||||
* ## 使用流程
|
||||
* ## 路由
|
||||
*
|
||||
* 1. 创建 datarouter_config.h 声明发送和接收能力（见 datarouter_config_template.h）
|
||||
* 2. 编译时通过 -I 指向你的配置目录；若无，库使用内置默认配置
|
||||
* 3. datarouter_init() 初始化
|
||||
* 4. port_create() 创建端口
|
||||
* 5. port_set_send_type() 设置发送类型 / port_set_recv_type() 设置接收类型
|
||||
* 6. port_add_handler() 注册外设发送函数
|
||||
* 7. 调 datarouter_send_<id>() 触发发送（库调用所有 handler）
|
||||
* 8. 实现 datarouter_on_recv_<id>() 处理接收数据
|
||||
* 调用 dr_send_<id>(data, len) 时，库遍历所有端口，
|
||||
* 找到 send_type 匹配的端口，逐一调用其全部 handler。无需指定从哪个端口发送。
|
||||
*
|
||||
* 接收侧由用户自行调用 dr_on_recv_<id>(port, data, len) 处理外设收到的数据。
|
||||
*/
|
||||
|
||||
#ifndef DATAROUTER_H
|
||||
#define DATAROUTER_H
|
||||
#ifndef DR_H
|
||||
#define DR_H
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stddef.h>
|
||||
|
||||
/*
|
||||
* 配置加载策略：
|
||||
* 1. 优先从 include path 搜索 <datarouter_config.h>（用户提供的版本）
|
||||
* 2. 找不到则回退到库自带的 "datarouter_config.h"（默认配置）
|
||||
*
|
||||
* 用户只需将自己的 datarouter_config.h 放到项目目录，
|
||||
* 编译时添加 -I /path/to/your/config 即可覆盖内置配置。
|
||||
*/
|
||||
#if defined(__has_include)
|
||||
# if __has_include(<datarouter_config.h>)
|
||||
# include <datarouter_config.h>
|
||||
@@ -50,77 +38,75 @@ extern "C" {
|
||||
|
||||
/* ========== 发送能力枚举 ========== */
|
||||
|
||||
enum datarouter_send_cap {
|
||||
#define DATAROUTER_SEND(id, desc) DATAROUTER_SEND_##id,
|
||||
DATAROUTER_SEND_CAPABILITIES
|
||||
#undef DATAROUTER_SEND
|
||||
DATAROUTER_SEND_CAP_COUNT
|
||||
enum dr_send_cap {
|
||||
#define DR_SEND(id, desc) DR_SEND_##id,
|
||||
DR_SEND_CAPABILITIES
|
||||
#undef DR_SEND
|
||||
DR_SEND_CAP_COUNT
|
||||
};
|
||||
|
||||
/* ========== 接收能力枚举 ========== */
|
||||
|
||||
enum datarouter_recv_cap {
|
||||
#define DATAROUTER_RECV(id, desc) DATAROUTER_RECV_##id,
|
||||
DATAROUTER_RECV_CAPABILITIES
|
||||
#undef DATAROUTER_RECV
|
||||
DATAROUTER_RECV_CAP_COUNT
|
||||
enum dr_recv_cap {
|
||||
#define DR_RECV(id, desc) DR_RECV_##id,
|
||||
DR_RECV_CAPABILITIES
|
||||
#undef DR_RECV
|
||||
DR_RECV_CAP_COUNT
|
||||
};
|
||||
|
||||
/* ========== 外设发送 handler 类型 ========== */
|
||||
/* ========== 外设发送 handler ========== */
|
||||
|
||||
typedef void (*datarouter_send_handler_t)(uint32_t port_id, const void *data, size_t len);
|
||||
typedef void (*dr_send_handler_t)(uint32_t port_id, const void *data, size_t len);
|
||||
|
||||
#ifndef DATAROUTER_MAX_HANDLERS_PER_PORT
|
||||
#define DATAROUTER_MAX_HANDLERS_PER_PORT 4
|
||||
#ifndef DR_MAX_HANDLERS_PER_PORT
|
||||
#define DR_MAX_HANDLERS_PER_PORT 4
|
||||
#endif
|
||||
|
||||
/* ========== 发送触发函数（每个发送能力生成一个） ========== */
|
||||
/* ========== 发送触发函数 ========== */
|
||||
|
||||
#define DATAROUTER_SEND(id, desc) \
|
||||
int datarouter_send_##id(uint32_t port_id, const void *data, size_t len);
|
||||
DATAROUTER_SEND_CAPABILITIES
|
||||
#undef DATAROUTER_SEND
|
||||
#define DR_SEND(id, desc) \
|
||||
int dr_send_##id(const void *data, size_t len);
|
||||
DR_SEND_CAPABILITIES
|
||||
#undef DR_SEND
|
||||
|
||||
/* ========== 接收回调声明（每个接收能力生成一个，用户实现） ========== */
|
||||
/* ========== 接收回调声明 ========== */
|
||||
|
||||
#define DATAROUTER_RECV(id, desc) \
|
||||
void datarouter_on_recv_##id(uint32_t port_id, const void *data, size_t len);
|
||||
DATAROUTER_RECV_CAPABILITIES
|
||||
#undef DATAROUTER_RECV
|
||||
#define DR_RECV(id, desc) \
|
||||
void dr_on_recv_##id(uint32_t port_id, const void *data, size_t len);
|
||||
DR_RECV_CAPABILITIES
|
||||
#undef DR_RECV
|
||||
|
||||
/* ========== 端口管理 API ========== */
|
||||
|
||||
typedef int32_t datarouter_port_t;
|
||||
#define DATAROUTER_INVALID_PORT ((datarouter_port_t)-1)
|
||||
typedef int32_t dr_port_t;
|
||||
#define DR_INVALID_PORT ((dr_port_t)-1)
|
||||
|
||||
void datarouter_init(void);
|
||||
void datarouter_reset(void);
|
||||
void dr_init(void);
|
||||
void dr_reset(void);
|
||||
|
||||
datarouter_port_t datarouter_port_create(void);
|
||||
void datarouter_port_delete(datarouter_port_t port);
|
||||
dr_port_t dr_port_create(void);
|
||||
void dr_port_delete(dr_port_t port);
|
||||
|
||||
void datarouter_port_set_send_type(datarouter_port_t port, int cap_id);
|
||||
int datarouter_port_get_send_type(datarouter_port_t port);
|
||||
void datarouter_port_set_recv_type(datarouter_port_t port, int cap_id);
|
||||
int datarouter_port_get_recv_type(datarouter_port_t port);
|
||||
void dr_port_set_send_type(dr_port_t port, int cap_id);
|
||||
int dr_port_get_send_type(dr_port_t port);
|
||||
|
||||
int datarouter_port_add_handler(datarouter_port_t port, datarouter_send_handler_t handler);
|
||||
int datarouter_port_remove_handler(datarouter_port_t port, datarouter_send_handler_t handler);
|
||||
void datarouter_port_clear_handlers(datarouter_port_t port);
|
||||
int datarouter_port_handler_count(datarouter_port_t port);
|
||||
int dr_port_add_handler(dr_port_t port, dr_send_handler_t handler);
|
||||
int dr_port_remove_handler(dr_port_t port, dr_send_handler_t handler);
|
||||
void dr_port_clear_handlers(dr_port_t port);
|
||||
int dr_port_handler_count(dr_port_t port);
|
||||
|
||||
/* ========== 能力元数据查询 ========== */
|
||||
|
||||
int datarouter_send_cap_count(void);
|
||||
const char *datarouter_send_cap_name(int cap_id);
|
||||
const char *datarouter_send_cap_desc(int cap_id);
|
||||
int dr_send_cap_count(void);
|
||||
const char *dr_send_cap_name(int cap_id);
|
||||
const char *dr_send_cap_desc(int cap_id);
|
||||
|
||||
int datarouter_recv_cap_count(void);
|
||||
const char *datarouter_recv_cap_name(int cap_id);
|
||||
const char *datarouter_recv_cap_desc(int cap_id);
|
||||
int dr_recv_cap_count(void);
|
||||
const char *dr_recv_cap_name(int cap_id);
|
||||
const char *dr_recv_cap_desc(int cap_id);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* DATAROUTER_H */
|
||||
#endif /* DR_H */
|
||||
+16
-16
@@ -6,35 +6,35 @@
|
||||
* 用户可自定义此文件以实现自己的报文类型：
|
||||
*
|
||||
* 1. 复制当前文件到你的项目目录
|
||||
* 2. 按需修改 DATAROUTER_SEND_CAPABILITIES / DATAROUTER_RECV_CAPABILITIES
|
||||
* 2. 按需修改 DR_SEND_CAPABILITIES / DR_RECV_CAPABILITIES
|
||||
* 3. 编译时添加 -I /path/to/your/config 覆盖库的默认配置
|
||||
*
|
||||
* 覆盖后库将使用你的版本，无需修改库源代码。
|
||||
*/
|
||||
|
||||
#ifndef DATAROUTER_CONFIG_H
|
||||
#define DATAROUTER_CONFIG_H
|
||||
#ifndef DR_CONFIG_H
|
||||
#define DR_CONFIG_H
|
||||
|
||||
/**
|
||||
* @def DATAROUTER_SEND_CAPABILITIES
|
||||
* @def DR_SEND_CAPABILITIES
|
||||
* @brief 发送能力列表
|
||||
*
|
||||
* 每行格式：DATAROUTER_SEND(标识符, "描述")
|
||||
* 每项生成：发送触发函数 datarouter_send_<id>(port, data, len)
|
||||
* 每行格式：DR_SEND(标识符, "描述")
|
||||
* 每项生成：发送触发函数 dr_send_<id>(port, data, len)
|
||||
*/
|
||||
#define DATAROUTER_SEND_CAPABILITIES \
|
||||
DATAROUTER_SEND(sensor, "Sensor data report") \
|
||||
DATAROUTER_SEND(status, "Device status report")
|
||||
#define DR_SEND_CAPABILITIES \
|
||||
DR_SEND(sensor, "Sensor data report") \
|
||||
DR_SEND(status, "Device status report")
|
||||
|
||||
/**
|
||||
* @def DATAROUTER_RECV_CAPABILITIES
|
||||
* @def DR_RECV_CAPABILITIES
|
||||
* @brief 接收能力列表
|
||||
*
|
||||
* 每行格式：DATAROUTER_RECV(标识符, "描述")
|
||||
* 每项生成：接收回调声明 datarouter_on_recv_<id>(port, data, len)
|
||||
* 每行格式：DR_RECV(标识符, "描述")
|
||||
* 每项生成：接收回调声明 dr_on_recv_<id>(port, data, len)
|
||||
*/
|
||||
#define DATAROUTER_RECV_CAPABILITIES \
|
||||
DATAROUTER_RECV(rtcm, "RTCM correction data") \
|
||||
DATAROUTER_RECV(command, "Remote control command")
|
||||
#define DR_RECV_CAPABILITIES \
|
||||
DR_RECV(rtcm, "RTCM correction data") \
|
||||
DR_RECV(command, "Remote control command")
|
||||
|
||||
#endif /* DATAROUTER_CONFIG_H */
|
||||
#endif /* DR_CONFIG_H */
|
||||
@@ -4,48 +4,48 @@
|
||||
*
|
||||
* 使用方法：
|
||||
* 1. 将此文件复制到你的项目目录，重命名为 datarouter_config.h
|
||||
* 2. 修改下面的 DATAROUTER_SEND_CAPABILITIES 和 DATAROUTER_RECV_CAPABILITIES
|
||||
* 2. 修改下面的 DR_SEND_CAPABILITIES 和 DR_RECV_CAPABILITIES
|
||||
* 3. 编译时添加 -I /path/to/your/project
|
||||
* 4. 库将自动使用你的配置，无需修改库源代码
|
||||
*
|
||||
* 格式说明：
|
||||
* 发送能力：DATAROUTER_SEND(标识符, "描述")
|
||||
* 接收能力：DATAROUTER_RECV(标识符, "描述")
|
||||
* 发送能力：DR_SEND(标识符, "描述")
|
||||
* 接收能力：DR_RECV(标识符, "描述")
|
||||
*
|
||||
* 标识符只能包含字母、数字、下划线。
|
||||
* 描述为字符串字面量。
|
||||
*
|
||||
* 示例配置：
|
||||
* // 传感器设备：只需发送
|
||||
* #define DATAROUTER_SEND_CAPABILITIES \
|
||||
* DATAROUTER_SEND(sensor, "Sensor data report")
|
||||
* #define DATAROUTER_RECV_CAPABILITIES
|
||||
* #define DR_SEND_CAPABILITIES \
|
||||
* DR_SEND(sensor, "Sensor data report")
|
||||
* #define DR_RECV_CAPABILITIES
|
||||
*
|
||||
* // 遥控设备：只需接收
|
||||
* #define DATAROUTER_SEND_CAPABILITIES
|
||||
* #define DATAROUTER_RECV_CAPABILITIES \
|
||||
* DATAROUTER_RECV(command, "Remote command")
|
||||
* #define DR_SEND_CAPABILITIES
|
||||
* #define DR_RECV_CAPABILITIES \
|
||||
* DR_RECV(command, "Remote command")
|
||||
*
|
||||
* // 网关设备：同时收发
|
||||
* #define DATAROUTER_SEND_CAPABILITIES \
|
||||
* DATAROUTER_SEND(status, "Status report")
|
||||
* #define DATAROUTER_RECV_CAPABILITIES \
|
||||
* DATAROUTER_RECV(config, "Configuration update")
|
||||
* #define DR_SEND_CAPABILITIES \
|
||||
* DR_SEND(status, "Status report")
|
||||
* #define DR_RECV_CAPABILITIES \
|
||||
* DR_RECV(config, "Configuration update")
|
||||
*/
|
||||
|
||||
#ifndef DATAROUTER_CONFIG_H
|
||||
#define DATAROUTER_CONFIG_H
|
||||
#ifndef DR_CONFIG_H
|
||||
#define DR_CONFIG_H
|
||||
|
||||
/* ========== 在此声明你的发送能力 ========== */
|
||||
|
||||
#define DATAROUTER_SEND_CAPABILITIES \
|
||||
DATAROUTER_SEND(sensor, "Sensor data report") \
|
||||
DATAROUTER_SEND(status, "Device status report")
|
||||
#define DR_SEND_CAPABILITIES \
|
||||
DR_SEND(sensor, "Sensor data report") \
|
||||
DR_SEND(status, "Device status report")
|
||||
|
||||
/* ========== 在此声明你的接收能力 ========== */
|
||||
|
||||
#define DATAROUTER_RECV_CAPABILITIES \
|
||||
DATAROUTER_RECV(rtcm, "RTCM correction data") \
|
||||
DATAROUTER_RECV(command, "Remote control command")
|
||||
#define DR_RECV_CAPABILITIES \
|
||||
DR_RECV(rtcm, "RTCM correction data") \
|
||||
DR_RECV(command, "Remote control command")
|
||||
|
||||
#endif /* DATAROUTER_CONFIG_H */
|
||||
#endif /* DR_CONFIG_H */
|
||||
@@ -1,93 +1,73 @@
|
||||
/**
|
||||
* @file example.c
|
||||
* @brief 数据路由库使用示例
|
||||
*
|
||||
* 展示：
|
||||
* - 发送能力和接收能力分开声明（sensor 只发送，rtcm 只接收）
|
||||
* - 端口独立设置 send_type 和 recv_type
|
||||
* - 一个端口可同时拥有发送和接收能力
|
||||
* 调用 dr_send_sensor(data, len) 无需指定端口，
|
||||
* 库自动广播到所有 send_type=sensor 的端口。
|
||||
*/
|
||||
|
||||
#include "datarouter.h"
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
|
||||
/* ---- 外设发送 handler ---- */
|
||||
|
||||
static void uart_send(uint32_t port_id, const void *data, size_t len)
|
||||
{
|
||||
printf("[UART] port %u: %.*s\n", port_id, (int)len, (const char *)data);
|
||||
printf("[UART port %u] %.*s\n", port_id, (int)len, (const char *)data);
|
||||
}
|
||||
|
||||
static void tcp_send(uint32_t port_id, const void *data, size_t len)
|
||||
{
|
||||
printf("[TCP] port %u: %.*s\n", port_id, (int)len, (const char *)data);
|
||||
printf("[TCP port %u] %.*s\n", port_id, (int)len, (const char *)data);
|
||||
}
|
||||
|
||||
/* ---- 接收回调实现 ---- */
|
||||
|
||||
void datarouter_on_recv_rtcm(uint32_t port_id, const void *data, size_t len)
|
||||
static void can_send(uint32_t port_id, const void *data, size_t len)
|
||||
{
|
||||
printf("[RX:rtcm] port %u: %.*s\n", port_id, (int)len, (const char *)data);
|
||||
printf("[CAN port %u] %.*s\n", port_id, (int)len, (const char *)data);
|
||||
}
|
||||
|
||||
void datarouter_on_recv_command(uint32_t port_id, const void *data, size_t len)
|
||||
void dr_on_recv_command(uint32_t port_id, const void *data, size_t len)
|
||||
{
|
||||
printf("[RX:cmd] port %u: %.*s\n", port_id, (int)len, (const char *)data);
|
||||
printf("[RX:cmd port %u] %.*s\n", port_id, (int)len, (const char *)data);
|
||||
}
|
||||
|
||||
int main(void)
|
||||
{
|
||||
datarouter_init();
|
||||
dr_init();
|
||||
|
||||
/* 查询能力 */
|
||||
printf("Send capabilities: %d\n", datarouter_send_cap_count());
|
||||
for (int i = 0; i < datarouter_send_cap_count(); i++)
|
||||
printf("Capabilities:\n");
|
||||
for (int i = 0; i < dr_send_cap_count(); i++)
|
||||
printf(" SEND [%d] %s - %s\n", i,
|
||||
datarouter_send_cap_name(i), datarouter_send_cap_desc(i));
|
||||
|
||||
printf("Recv capabilities: %d\n", datarouter_recv_cap_count());
|
||||
for (int i = 0; i < datarouter_recv_cap_count(); i++)
|
||||
printf(" RECV [%d] %s - %s\n", i,
|
||||
datarouter_recv_cap_name(i), datarouter_recv_cap_desc(i));
|
||||
dr_send_cap_name(i), dr_send_cap_desc(i));
|
||||
|
||||
/*
|
||||
* 端口 A：只有发送能力 —— 上报传感器数据
|
||||
* 创建两个端口，都设 send_type=sensor，各绑不同外设。
|
||||
* 调用 dr_send_sensor() 时两个端口同时触发。
|
||||
*/
|
||||
datarouter_port_t tx_port = datarouter_port_create();
|
||||
datarouter_port_set_send_type(tx_port, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(tx_port, uart_send);
|
||||
datarouter_port_add_handler(tx_port, tcp_send);
|
||||
dr_port_t p1 = dr_port_create();
|
||||
dr_port_set_send_type(p1, DR_SEND_sensor);
|
||||
dr_port_add_handler(p1, uart_send);
|
||||
dr_port_add_handler(p1, tcp_send);
|
||||
|
||||
printf("\n--- send sensor (UART + TCP) ---\n");
|
||||
datarouter_send_sensor(tx_port, "temperature:25.3", 16);
|
||||
/* 该端口没有 recv_type，不能接收任何报文 */
|
||||
dr_port_t p2 = dr_port_create();
|
||||
dr_port_set_send_type(p2, DR_SEND_sensor);
|
||||
dr_port_add_handler(p2, can_send);
|
||||
|
||||
/*
|
||||
* 端口 B：只有接收能力 —— 接收 RTCM 修正
|
||||
*/
|
||||
datarouter_port_t rtcm_port = datarouter_port_create();
|
||||
datarouter_port_set_recv_type(rtcm_port, DATAROUTER_RECV_rtcm);
|
||||
/* 没有 send_type，也没有 handler —— 不能发送 */
|
||||
/* 不指定端口，自动广播到所有 sensor 端口 */
|
||||
printf("\n--- send_sensor (auto-route to ALL sensor ports) ---\n");
|
||||
dr_send_sensor("temperature:25.3", 16);
|
||||
|
||||
printf("\n--- simulate receive RTCM ---\n");
|
||||
datarouter_on_recv_rtcm(rtcm_port, "rtcm_data_v3.2", 14);
|
||||
/* 运行时移除一个 handler，下次发送不再触发它 */
|
||||
printf("\n--- remove TCP handler from p1, resend ---\n");
|
||||
dr_port_remove_handler(p1, tcp_send);
|
||||
dr_send_sensor("temperature:26.1", 16);
|
||||
|
||||
/*
|
||||
* 端口 C：同时有收发能力 —— 接收命令 + 上报状态
|
||||
*/
|
||||
datarouter_port_t bi_port = datarouter_port_create();
|
||||
datarouter_port_set_send_type(bi_port, DATAROUTER_SEND_status);
|
||||
datarouter_port_set_recv_type(bi_port, DATAROUTER_RECV_command);
|
||||
datarouter_port_add_handler(bi_port, uart_send);
|
||||
/* 接收侧：用户自行调用回调 */
|
||||
printf("\n--- recv command ---\n");
|
||||
dr_on_recv_command(0, "reboot", 6);
|
||||
|
||||
printf("\n--- bidirectional port ---\n");
|
||||
datarouter_send_status(bi_port, "status:OK", 9);
|
||||
datarouter_on_recv_command(bi_port, "reboot", 6);
|
||||
/* 删除一个端口，触发时不再走它 */
|
||||
printf("\n--- delete p2 (CAN), resend ---\n");
|
||||
dr_port_delete(p2);
|
||||
dr_send_sensor("temperature:27.0", 16);
|
||||
|
||||
/* 清理 */
|
||||
datarouter_port_delete(tx_port);
|
||||
datarouter_port_delete(rtcm_port);
|
||||
datarouter_port_delete(bi_port);
|
||||
dr_port_delete(p1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
+165
-211
@@ -1,15 +1,5 @@
|
||||
/**
|
||||
* @file test_datarouter.c
|
||||
* @brief 数据路由库单元测试
|
||||
*
|
||||
* 覆盖：
|
||||
* - 端口管理
|
||||
* - send_type / recv_type 独立设置
|
||||
* - 多 handler 增删
|
||||
* - 发送调用（一对多广播）
|
||||
* - 接收回调
|
||||
* - 发送/接收能力元数据各自独立
|
||||
* - 错误处理
|
||||
*/
|
||||
|
||||
#include "datarouter.h"
|
||||
@@ -17,7 +7,7 @@
|
||||
#include <string.h>
|
||||
|
||||
/* ================================================================
|
||||
* 测试框架
|
||||
* 框架
|
||||
* ================================================================ */
|
||||
|
||||
static int _total_run, _total_pass, _total_fail;
|
||||
@@ -26,14 +16,14 @@ static const char *_cur_name;
|
||||
|
||||
#define FIXTURE_MAX 16
|
||||
typedef struct {
|
||||
datarouter_port_t ports[FIXTURE_MAX];
|
||||
dr_port_t ports[FIXTURE_MAX];
|
||||
int count;
|
||||
} fixture_t;
|
||||
|
||||
#define FIXTURE_INIT(f) memset((f), 0, sizeof(*(f)))
|
||||
#define FIXTURE_PUSH(f, p) do { if ((f)->count < FIXTURE_MAX) (f)->ports[(f)->count++] = (p); } while (0)
|
||||
#define FIXTURE_CLEAN(f) do { for (int _i = 0; _i < (f)->count; _i++) datarouter_port_delete((f)->ports[_i]); } while (0)
|
||||
#define FIXTURE_CREATE(f) ({ datarouter_port_t _p = datarouter_port_create(); FIXTURE_PUSH(f, _p); _p; })
|
||||
#define FIXTURE_CLEAN(f) do { for (int _i = 0; _i < (f)->count; _i++) dr_port_delete((f)->ports[_i]); } while (0)
|
||||
#define FIXTURE_CREATE(f) ({ dr_port_t _p = dr_port_create(); FIXTURE_PUSH(f, _p); _p; })
|
||||
|
||||
#define TEST_START(name) \
|
||||
static void test_##name(void) \
|
||||
@@ -66,19 +56,19 @@ cleanup: \
|
||||
* ================================================================ */
|
||||
|
||||
static int _h_cnt;
|
||||
static void _h(uint32_t p, const void *d, size_t l) { (void)p; (void)d; (void)l; _h_cnt++; }
|
||||
static void _h_a(uint32_t p, const void *d, size_t l) { (void)p; (void)d; (void)l; _h_cnt++; }
|
||||
static void _h_b(uint32_t p, const void *d, size_t l) { (void)p; (void)d; (void)l; _h_cnt++; }
|
||||
static void _h_c(uint32_t p, const void *d, size_t l) { (void)p; (void)d; (void)l; _h_cnt++; }
|
||||
static void _h_d(uint32_t p, const void *d, size_t l) { (void)p; (void)d; (void)l; _h_cnt++; }
|
||||
static void reset_h(void) { _h_cnt = 0; }
|
||||
static int _h_port[16];
|
||||
static int _h_pos;
|
||||
static void _h(uint32_t p, const void *d, size_t l) { (void)d; (void)l; _h_cnt++; if (_h_pos<16) _h_port[_h_pos++]=p; }
|
||||
static void _h2(uint32_t p, const void *d, size_t l) { (void)d; (void)l; _h_cnt++; if (_h_pos<16) _h_port[_h_pos++]=p; }
|
||||
static void _h3(uint32_t p, const void *d, size_t l) { (void)d; (void)l; _h_cnt++; if (_h_pos<16) _h_port[_h_pos++]=p; }
|
||||
static void reset_h(void) { _h_cnt = 0; _h_pos = 0; }
|
||||
|
||||
/* ================================================================
|
||||
* 1. 未初始化
|
||||
* ================================================================ */
|
||||
|
||||
TEST_START(error_uninit)
|
||||
CHECK(datarouter_send_sensor(0, "d", 1) == -1, "expected -1");
|
||||
CHECK(dr_send_sensor("d", 1) == -1, "expected -1");
|
||||
TEST_END()
|
||||
|
||||
/* ================================================================
|
||||
@@ -86,244 +76,219 @@ TEST_END()
|
||||
* ================================================================ */
|
||||
|
||||
TEST_START(port_create_basic)
|
||||
CHECK(FIXTURE_CREATE(&_fix) >= 0, "create failed");
|
||||
CHECK(FIXTURE_CREATE(&_fix) >= 0, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(port_create_max)
|
||||
int c = 0;
|
||||
for (int i = 0; i < 64; i++) {
|
||||
datarouter_port_t p = datarouter_port_create();
|
||||
if (p == DATAROUTER_INVALID_PORT) break;
|
||||
dr_port_t p = dr_port_create();
|
||||
if (p == DR_INVALID_PORT) break;
|
||||
FIXTURE_PUSH(&_fix, p); c++;
|
||||
}
|
||||
CHECK(c >= 64, "got %d", c);
|
||||
CHECK(datarouter_port_create() == DATAROUTER_INVALID_PORT, NULL);
|
||||
CHECK(dr_port_create() == DR_INVALID_PORT, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(port_delete_invalid)
|
||||
datarouter_port_delete(-1); datarouter_port_delete(999);
|
||||
dr_port_delete(-1); dr_port_delete(999);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(port_default_state)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
CHECK(datarouter_port_get_send_type(p) == -1, "send_type should be -1");
|
||||
CHECK(datarouter_port_get_recv_type(p) == -1, "recv_type should be -1");
|
||||
CHECK(datarouter_port_handler_count(p) == 0, "handler count 0");
|
||||
dr_port_t p = FIXTURE_CREATE(&_fix);
|
||||
CHECK(dr_port_get_send_type(p) == -1, NULL);
|
||||
CHECK(dr_port_handler_count(p) == 0, NULL);
|
||||
TEST_END()
|
||||
|
||||
/* ================================================================
|
||||
* 3. send_type / recv_type 独立设置
|
||||
* 3. send_type 与 handler
|
||||
* ================================================================ */
|
||||
|
||||
TEST_START(send_type_set_get)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
CHECK(datarouter_port_get_send_type(p) == DATAROUTER_SEND_sensor, NULL);
|
||||
dr_port_t p = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p, DR_SEND_sensor);
|
||||
CHECK(dr_port_get_send_type(p) == DR_SEND_sensor, NULL);
|
||||
dr_port_set_send_type(p, -1);
|
||||
CHECK(dr_port_get_send_type(p) == -1, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(recv_type_set_get)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_recv_type(p, DATAROUTER_RECV_rtcm);
|
||||
CHECK(datarouter_port_get_recv_type(p) == DATAROUTER_RECV_rtcm, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(types_independent)
|
||||
/* 一个端口同时设置 send_type 和 recv_type，互不干扰 */
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_set_recv_type(p, DATAROUTER_RECV_command);
|
||||
CHECK(datarouter_port_get_send_type(p) == DATAROUTER_SEND_sensor, NULL);
|
||||
CHECK(datarouter_port_get_recv_type(p) == DATAROUTER_RECV_command, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(send_type_clear)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_set_send_type(p, -1);
|
||||
CHECK(datarouter_port_get_send_type(p) == -1, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(recv_type_clear)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_recv_type(p, DATAROUTER_RECV_rtcm);
|
||||
datarouter_port_set_recv_type(p, -1);
|
||||
CHECK(datarouter_port_get_recv_type(p) == -1, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(types_from_invalid)
|
||||
CHECK(datarouter_port_get_send_type(-1) == -1, NULL);
|
||||
CHECK(datarouter_port_get_recv_type(-1) == -1, NULL);
|
||||
CHECK(datarouter_port_get_send_type(999) == -1, NULL);
|
||||
CHECK(datarouter_port_get_recv_type(999) == -1, NULL);
|
||||
TEST_END()
|
||||
|
||||
/* ================================================================
|
||||
* 4. 多 handler
|
||||
* ================================================================ */
|
||||
|
||||
TEST_START(handler_add_remove)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
CHECK(datarouter_port_add_handler(p, _h_a) == 0, NULL);
|
||||
CHECK(datarouter_port_add_handler(p, _h_b) == 0, NULL);
|
||||
CHECK(datarouter_port_handler_count(p) == 2, NULL);
|
||||
CHECK(datarouter_port_remove_handler(p, _h_a) == 0, NULL);
|
||||
CHECK(datarouter_port_handler_count(p) == 1, NULL);
|
||||
dr_port_t p = FIXTURE_CREATE(&_fix);
|
||||
CHECK(dr_port_add_handler(p, _h) == 0, NULL);
|
||||
CHECK(dr_port_handler_count(p) == 1, NULL);
|
||||
CHECK(dr_port_remove_handler(p, _h) == 0, NULL);
|
||||
CHECK(dr_port_handler_count(p) == 0, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(handler_clear)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_add_handler(p, _h);
|
||||
datarouter_port_clear_handlers(p);
|
||||
CHECK(datarouter_port_handler_count(p) == 0, NULL);
|
||||
dr_port_t p = FIXTURE_CREATE(&_fix);
|
||||
dr_port_add_handler(p, _h);
|
||||
dr_port_clear_handlers(p);
|
||||
CHECK(dr_port_handler_count(p) == 0, NULL);
|
||||
TEST_END()
|
||||
|
||||
/* ================================================================
|
||||
* 5. 发送触发
|
||||
* 4. 发送 — 自动广播
|
||||
* ================================================================ */
|
||||
|
||||
TEST_START(send_one_handler)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(p, _h);
|
||||
TEST_START(send_no_match_port)
|
||||
/* 没有端口配置该 send_type */
|
||||
CHECK(dr_send_sensor("d", 1) == -2, "expected -2");
|
||||
TEST_END()
|
||||
|
||||
TEST_START(send_one_port_one_handler)
|
||||
dr_port_t p = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p, DR_SEND_sensor);
|
||||
dr_port_add_handler(p, _h);
|
||||
reset_h();
|
||||
CHECK(datarouter_send_sensor(p, "d", 1) == 0, NULL);
|
||||
CHECK(_h_cnt == 1, "handler called %d times", _h_cnt);
|
||||
CHECK(dr_send_sensor("d", 1) == 0, NULL);
|
||||
CHECK(_h_cnt == 1, "cnt=%d", _h_cnt);
|
||||
CHECK(_h_port[0] == (int)p, "port=%d", _h_port[0]);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(send_multi_handlers)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(p, _h_a);
|
||||
datarouter_port_add_handler(p, _h_b);
|
||||
datarouter_port_add_handler(p, _h_c);
|
||||
TEST_START(send_one_port_multi_handler)
|
||||
dr_port_t p = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p, DR_SEND_sensor);
|
||||
dr_port_add_handler(p, _h);
|
||||
dr_port_add_handler(p, _h2);
|
||||
reset_h();
|
||||
CHECK(datarouter_send_sensor(p, "d", 1) == 0, NULL);
|
||||
CHECK(_h_cnt == 3, "handler called %d times", _h_cnt);
|
||||
CHECK(dr_send_sensor("d", 1) == 0, NULL);
|
||||
CHECK(_h_cnt == 2, "cnt=%d", _h_cnt);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(send_type_mismatch)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(p, _h);
|
||||
TEST_START(send_multi_ports_same_type)
|
||||
/* 两个端口同类型，各一个 handler */
|
||||
dr_port_t p1 = FIXTURE_CREATE(&_fix);
|
||||
dr_port_t p2 = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p1, DR_SEND_sensor);
|
||||
dr_port_set_send_type(p2, DR_SEND_sensor);
|
||||
dr_port_add_handler(p1, _h);
|
||||
dr_port_add_handler(p2, _h);
|
||||
reset_h();
|
||||
CHECK(datarouter_send_status(p, "d", 1) == -3, "expected -3");
|
||||
CHECK(_h_cnt == 0, NULL);
|
||||
CHECK(dr_send_sensor("d", 1) == 0, NULL);
|
||||
CHECK(_h_cnt == 2, "cnt=%d", _h_cnt);
|
||||
/* p1 和 p2 各触发一次 */
|
||||
CHECK((_h_port[0]==p1 && _h_port[1]==p2) ||
|
||||
(_h_port[0]==p2 && _h_port[1]==p1), "ports %d,%d", _h_port[0], _h_port[1]);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(send_no_handler)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
CHECK(datarouter_send_sensor(p, "d", 1) == -4, "expected -4");
|
||||
TEST_START(send_multi_port_multi_handler)
|
||||
dr_port_t p1 = FIXTURE_CREATE(&_fix);
|
||||
dr_port_t p2 = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p1, DR_SEND_sensor);
|
||||
dr_port_set_send_type(p2, DR_SEND_sensor);
|
||||
dr_port_add_handler(p1, _h);
|
||||
dr_port_add_handler(p1, _h2); /* p1 两个 */
|
||||
dr_port_add_handler(p2, _h3); /* p2 一个 */
|
||||
reset_h();
|
||||
CHECK(dr_send_sensor("d", 1) == 0, NULL);
|
||||
CHECK(_h_cnt == 3, "cnt=%d", _h_cnt);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(send_no_send_type)
|
||||
/* 端口只有 recv_type，没有 send_type */
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_recv_type(p, DATAROUTER_RECV_rtcm);
|
||||
CHECK(datarouter_send_sensor(p, "d", 1) == -3, "expected -3 (send_type unset)");
|
||||
TEST_START(send_type_filter)
|
||||
/* 两个端口不同类型，只触发匹配的 */
|
||||
dr_port_t p1 = FIXTURE_CREATE(&_fix);
|
||||
dr_port_t p2 = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p1, DR_SEND_sensor);
|
||||
dr_port_set_send_type(p2, DR_SEND_status);
|
||||
dr_port_add_handler(p1, _h);
|
||||
dr_port_add_handler(p2, _h);
|
||||
reset_h();
|
||||
CHECK(dr_send_sensor("d", 1) == 0, NULL);
|
||||
CHECK(_h_cnt == 1, "cnt=%d", _h_cnt);
|
||||
CHECK(_h_port[0] == (int)p1, "only p1 should fire");
|
||||
TEST_END()
|
||||
|
||||
TEST_START(send_remove_handler)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(p, _h_a);
|
||||
datarouter_port_add_handler(p, _h_b);
|
||||
reset_h(); datarouter_send_sensor(p, "d", 1); CHECK(_h_cnt == 2, NULL);
|
||||
datarouter_port_remove_handler(p, _h_a);
|
||||
reset_h(); datarouter_send_sensor(p, "d", 1); CHECK(_h_cnt == 1, NULL);
|
||||
TEST_START(send_after_remove_handler)
|
||||
dr_port_t p = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p, DR_SEND_sensor);
|
||||
dr_port_add_handler(p, _h);
|
||||
reset_h(); dr_send_sensor("d", 1); CHECK(_h_cnt == 1, NULL);
|
||||
dr_port_remove_handler(p, _h);
|
||||
CHECK(dr_send_sensor("d", 1) == -2, "expected -2 after remove");
|
||||
TEST_END()
|
||||
|
||||
TEST_START(send_clear_handlers)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(p, _h);
|
||||
datarouter_port_clear_handlers(p);
|
||||
CHECK(datarouter_send_sensor(p, "d", 1) == -4, "expected -4");
|
||||
TEST_START(send_after_delete_port)
|
||||
dr_port_t p = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p, DR_SEND_sensor);
|
||||
dr_port_add_handler(p, _h);
|
||||
dr_port_delete(p);
|
||||
CHECK(dr_send_sensor("d", 1) == -2, "expected -2");
|
||||
_fix.count--;
|
||||
TEST_END()
|
||||
|
||||
TEST_START(send_zero_length)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(p, _h);
|
||||
dr_port_t p = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p, DR_SEND_sensor);
|
||||
dr_port_add_handler(p, _h);
|
||||
reset_h();
|
||||
CHECK(datarouter_send_sensor(p, "x", 0) == 0, NULL);
|
||||
CHECK(dr_send_sensor("x", 0) == 0, NULL);
|
||||
CHECK(_h_cnt == 1, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(send_null_data)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(p, _h);
|
||||
dr_port_t p = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p, DR_SEND_sensor);
|
||||
dr_port_add_handler(p, _h);
|
||||
reset_h();
|
||||
CHECK(datarouter_send_sensor(p, NULL, 0) == 0, NULL);
|
||||
CHECK(dr_send_sensor(NULL, 0) == 0, NULL);
|
||||
CHECK(_h_cnt == 1, NULL);
|
||||
TEST_END()
|
||||
|
||||
/* ================================================================
|
||||
* 6. 接收回调
|
||||
* ================================================================ */
|
||||
|
||||
static int _rx_r, _rx_c;
|
||||
void datarouter_on_recv_rtcm(uint32_t p, const void *d, size_t l)
|
||||
{ (void)p; (void)d; (void)l; _rx_r++; }
|
||||
void datarouter_on_recv_command(uint32_t p, const void *d, size_t l)
|
||||
{ (void)p; (void)d; (void)l; _rx_c++; }
|
||||
|
||||
TEST_START(recv_callbacks)
|
||||
_rx_r = _rx_c = 0;
|
||||
datarouter_on_recv_rtcm(0, "d", 1);
|
||||
CHECK(_rx_r == 1 && _rx_c == 0, "rtcm=%d cmd=%d", _rx_r, _rx_c);
|
||||
datarouter_on_recv_command(1, "d", 1);
|
||||
CHECK(_rx_r == 1 && _rx_c == 1, "rtcm=%d cmd=%d", _rx_r, _rx_c);
|
||||
TEST_START(send_multi_cap)
|
||||
/* 发送 status 不影响 sensor 端口 */
|
||||
dr_port_t p1 = FIXTURE_CREATE(&_fix);
|
||||
dr_port_t p2 = FIXTURE_CREATE(&_fix);
|
||||
dr_port_set_send_type(p1, DR_SEND_sensor);
|
||||
dr_port_set_send_type(p2, DR_SEND_status);
|
||||
dr_port_add_handler(p1, _h);
|
||||
dr_port_add_handler(p2, _h);
|
||||
reset_h();
|
||||
CHECK(dr_send_sensor("d", 1) == 0, NULL);
|
||||
CHECK(_h_cnt == 1, "sensor: cnt=%d", _h_cnt);
|
||||
CHECK(dr_send_status("d", 1) == 0, NULL);
|
||||
CHECK(_h_cnt == 2, "status: cnt=%d", _h_cnt);
|
||||
TEST_END()
|
||||
|
||||
/* ================================================================
|
||||
* 7. 能力元数据（两组独立）
|
||||
* 5. 接收回调
|
||||
* ================================================================ */
|
||||
|
||||
static int _rx_r;
|
||||
void dr_on_recv_rtcm(uint32_t p, const void *d, size_t l)
|
||||
{ (void)p; (void)d; (void)l; _rx_r++; }
|
||||
|
||||
TEST_START(recv_callback)
|
||||
_rx_r = 0;
|
||||
dr_on_recv_rtcm(0, "d", 1);
|
||||
CHECK(_rx_r == 1, "cnt=%d", _rx_r);
|
||||
TEST_END()
|
||||
|
||||
/* ================================================================
|
||||
* 6. 能力元数据
|
||||
* ================================================================ */
|
||||
|
||||
TEST_START(send_cap_meta)
|
||||
CHECK(datarouter_send_cap_count() == 2, NULL);
|
||||
CHECK(strcmp(datarouter_send_cap_name(0), "sensor") == 0, NULL);
|
||||
CHECK(strcmp(datarouter_send_cap_desc(0), "Sensor data report") == 0, NULL);
|
||||
CHECK(strcmp(datarouter_send_cap_name(1), "status") == 0, NULL);
|
||||
CHECK(strcmp(datarouter_send_cap_desc(1), "Device status report") == 0, NULL);
|
||||
CHECK(datarouter_send_cap_name(-1) == NULL, NULL);
|
||||
CHECK(datarouter_send_cap_name(99) == NULL, NULL);
|
||||
CHECK(dr_send_cap_count() == 2, NULL);
|
||||
CHECK(strcmp(dr_send_cap_name(0), "sensor") == 0, NULL);
|
||||
CHECK(strcmp(dr_send_cap_desc(0), "Sensor data report") == 0, NULL);
|
||||
CHECK(dr_send_cap_name(-1) == NULL, NULL);
|
||||
CHECK(dr_send_cap_name(99) == NULL, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(recv_cap_meta)
|
||||
CHECK(datarouter_recv_cap_count() == 2, NULL);
|
||||
CHECK(strcmp(datarouter_recv_cap_name(0), "rtcm") == 0, NULL);
|
||||
CHECK(strcmp(datarouter_recv_cap_desc(0), "RTCM correction data") == 0, NULL);
|
||||
CHECK(strcmp(datarouter_recv_cap_name(1), "command") == 0, NULL);
|
||||
CHECK(strcmp(datarouter_recv_cap_desc(1), "Remote control command") == 0, NULL);
|
||||
CHECK(datarouter_recv_cap_name(-1) == NULL, NULL);
|
||||
CHECK(datarouter_recv_cap_desc(99) == NULL, NULL);
|
||||
TEST_END()
|
||||
|
||||
/* ================================================================
|
||||
* 8. 错误
|
||||
* ================================================================ */
|
||||
|
||||
TEST_START(error_invalid_port)
|
||||
CHECK(datarouter_send_sensor(999, "d", 1) == -2, NULL);
|
||||
CHECK(datarouter_send_sensor(-1, "d", 1) == -2, NULL);
|
||||
TEST_END()
|
||||
|
||||
TEST_START(error_deleted_port)
|
||||
datarouter_port_t p = FIXTURE_CREATE(&_fix);
|
||||
datarouter_port_set_send_type(p, DATAROUTER_SEND_sensor);
|
||||
datarouter_port_add_handler(p, _h);
|
||||
datarouter_port_delete(p);
|
||||
CHECK(datarouter_send_sensor(p, "d", 1) == -2, NULL);
|
||||
_fix.count--;
|
||||
CHECK(dr_recv_cap_count() == 2, NULL);
|
||||
CHECK(strcmp(dr_recv_cap_name(0), "rtcm") == 0, NULL);
|
||||
CHECK(strcmp(dr_recv_cap_desc(0), "RTCM correction data") == 0, NULL);
|
||||
CHECK(dr_recv_cap_name(-1) == NULL, NULL);
|
||||
CHECK(dr_recv_cap_desc(99) == NULL, NULL);
|
||||
TEST_END()
|
||||
|
||||
/* ================================================================
|
||||
* 主函数
|
||||
* ================================================================ */
|
||||
|
||||
#define RUN(name) do { reset_h(); test_##name(); } while (0)
|
||||
#define RUN(name) do { reset_h(); _rx_r = 0; test_##name(); } while (0)
|
||||
|
||||
int main(void)
|
||||
{
|
||||
@@ -332,7 +297,7 @@ int main(void)
|
||||
printf("[uninitialized]\n");
|
||||
RUN(error_uninit);
|
||||
|
||||
datarouter_init();
|
||||
dr_init();
|
||||
|
||||
printf("\n[port management]\n");
|
||||
RUN(port_create_basic);
|
||||
@@ -341,35 +306,29 @@ int main(void)
|
||||
RUN(port_default_state);
|
||||
printf("\n");
|
||||
|
||||
datarouter_reset(); datarouter_init();
|
||||
printf("[send_type / recv_type]\n");
|
||||
dr_reset(); dr_init();
|
||||
printf("[send_type & handler]\n");
|
||||
RUN(send_type_set_get);
|
||||
RUN(recv_type_set_get);
|
||||
RUN(types_independent);
|
||||
RUN(send_type_clear);
|
||||
RUN(recv_type_clear);
|
||||
RUN(types_from_invalid);
|
||||
printf("\n");
|
||||
|
||||
printf("[handler add/remove]\n");
|
||||
RUN(handler_add_remove);
|
||||
RUN(handler_clear);
|
||||
printf("\n");
|
||||
|
||||
printf("[send trigger]\n");
|
||||
RUN(send_one_handler);
|
||||
RUN(send_multi_handlers);
|
||||
RUN(send_type_mismatch);
|
||||
RUN(send_no_handler);
|
||||
RUN(send_no_send_type);
|
||||
RUN(send_remove_handler);
|
||||
RUN(send_clear_handlers);
|
||||
printf("[send — auto broadcast]\n");
|
||||
RUN(send_no_match_port);
|
||||
RUN(send_one_port_one_handler);
|
||||
RUN(send_one_port_multi_handler);
|
||||
RUN(send_multi_ports_same_type);
|
||||
RUN(send_multi_port_multi_handler);
|
||||
RUN(send_type_filter);
|
||||
RUN(send_after_remove_handler);
|
||||
RUN(send_after_delete_port);
|
||||
RUN(send_zero_length);
|
||||
RUN(send_null_data);
|
||||
RUN(send_multi_cap);
|
||||
printf("\n");
|
||||
|
||||
printf("[receive callback]\n");
|
||||
RUN(recv_callbacks);
|
||||
RUN(recv_callback);
|
||||
printf("\n");
|
||||
|
||||
printf("[capability metadata]\n");
|
||||
@@ -377,11 +336,6 @@ int main(void)
|
||||
RUN(recv_cap_meta);
|
||||
printf("\n");
|
||||
|
||||
printf("[error handling]\n");
|
||||
RUN(error_invalid_port);
|
||||
RUN(error_deleted_port);
|
||||
printf("\n");
|
||||
|
||||
printf("==============================\n");
|
||||
printf(" total: %d | pass: %d | fail: %d\n\n",
|
||||
_total_run, _total_pass, _total_fail);
|
||||
|
||||
Reference in New Issue
Block a user